Teroson PU 8590 windscreen adhesive 600 ml black polyurethane for bonding front rear and side vehicle glass
Product code: 1190847
Leave feedback on the product
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Related products
Secure purchase guarantee
Product description
IMPORTANT SALES INFORMATION: this product is sold exclusively in full cartons of 20 units. The minimum order quantity is 20 units. Available order quantities are 20, 40, 60, 80 units and further multiples of 20.
TEROSON PU 8590 600 ml – polyurethane adhesive for automotive glass bonding
TEROSON PU 8590 600 ml is a black, one-component polyurethane adhesive designed for direct glazing applications in vehicles. It is used for the replacement and installation of windscreens, rear windows and side windows in passenger cars, commercial vehicles, special-purpose vehicles and rail vehicles.
The adhesive cures under the influence of atmospheric moisture. Its smooth, paste-like and non-sag consistency facilitates the application of a stable adhesive bead and helps prevent the material from flowing before the glass is positioned. The product is free from PVC and solvents.
Applications of TEROSON PU 8590
TEROSON PU 8590 is intended for the professional installation and replacement of:
- windscreens in passenger cars and commercial vehicles,
- rear windows and side windows,
- glass in trucks and buses,
- glass in special-purpose vehicles,
- glass in rail vehicles.
After appropriate surface preparation and the use of a suitable primer, the product can be used for bonding glass, ceramic-coated glass, painted surfaces and a properly prepared remaining layer of polyurethane adhesive.
What distinguishes TEROSON PU 8590
- One-component formulation – the product is ready for application without mixing.
- Polyurethane technology – the adhesive cures under the influence of atmospheric moisture.
- Non-sag properties – the paste-like consistency helps maintain the correct shape of the applied adhesive bead.
- Elongation at break of approximately 400% – the cured bond remains flexible.
- Shear strength – approximately 2 MPa after 24 hours and 5 to 6 MPa after full cure.
- Free from PVC and solvents.
- Maximum glazing time of up to 25 minutes – measured from the beginning of adhesive application to positioning the glass.
- Safe drive-away time of 8 hours for a vehicle equipped with an airbag, according to the manufacturer’s information.
When to choose TEROSON PU 8590
The product is a suitable choice for workshops, automotive glass services, repair facilities and industrial users looking for a proven polyurethane adhesive for standard direct glazing work.
Due to the distribution method, the product is intended primarily for customers using larger quantities of adhesive. It is sold exclusively in full cartons of 20 units and in multiples of 20 units.
Surface preparation and adhesive application
The bonding surfaces must be clean, dry and free from grease. New glass should be checked for damage and prepared in accordance with the manufacturer’s instructions and the requirements of the glazing repair system being used.
The manufacturer recommends using suitable TEROSON products for cleaning, activation and priming. TEROSON PU 8590 can be dispensed from a foil pack using a suitable manual, battery-powered or pneumatic applicator equipped with a plunger.
The maximum time between the start of adhesive application and positioning the glass is 25 minutes. Before beginning work, consult the current Technical Data Sheet and Safety Data Sheet.
Technical data of TEROSON PU 8590
| Parameter | Value |
|---|---|
| Brand | TEROSON |
| Product designation | PU 8590 |
| Product code | 1190847 |
| Product type | One-component automotive glass adhesive |
| Technology | Polyurethane |
| Curing mechanism | Moisture curing |
| Colour | Black |
| Consistency | Smooth, paste-like and non-sag |
| Odour | Mild |
| Density | Approx. 1.24 g/cm³ |
| Solids content | 100% |
| Curing speed | Approx. 3–4 mm per 24 hours at 23°C and 50% relative humidity |
| Hardness | Approx. 55 Shore A |
| Tensile strength | Approx. 8.5 MPa |
| Elongation at break | Approx. 400% |
| Shear strength after 24 hours | Approx. 2 MPa |
| Shear strength after full cure | 5 to 6 MPa |
| Maximum glazing time | 25 minutes |
| Safe drive-away time for vehicles with an airbag | 8 hours |
| Product application temperature | From 5°C to 35°C |
| Ambient application temperature | From -10°C to 45°C |
| Service temperature range | From -40°C to 90°C |
| Short-term temperature resistance | Up to 120°C for a maximum of 1 hour |
| PVC and solvent content | Free from PVC and solvents |
| Unit volume | 600 ml |
| Minimum order quantity | 20 units |
| Sales unit | Full cartons of 20 units and multiples thereof |
Storage
TEROSON PU 8590 should be stored in its original, tightly closed packaging at a temperature between 5°C and 25°C. The manufacturer states that the product is not sensitive to freezing. The declared shelf life for the foil pack is 12 months when stored correctly.
FAQ
Can I order one unit of TEROSON PU 8590?
No. The product is sold exclusively in full cartons of 20 units. The minimum order quantity is 20 units.
What quantities of TEROSON PU 8590 can be ordered?
You can order 20, 40, 60, 80 units and further multiples of 20.
Does the price shown on the product page refer to one unit or the entire carton?
The price shown on the product page refers to one 600 ml unit. However, the product can only be purchased in a full carton containing 20 units or in multiples of 20 units.
What types of automotive glass is TEROSON PU 8590 intended for?
The adhesive is intended for bonding windscreens, rear windows and side windows in passenger cars, commercial vehicles, special-purpose vehicles and rail vehicles.
What is the safe drive-away time?
The manufacturer specifies a safe drive-away time of 8 hours for vehicles equipped with an airbag. This result requires correct application conditions and compliance with the recommended glazing procedure.
Does TEROSON PU 8590 require a primer?
The preparation method depends on the type of surface and the condition of the remaining adhesive layer. The manufacturer provides for the use of suitable cleaning agents, an activator or TEROSON PU 8519P primer in accordance with the technical instructions.
Can the adhesive be applied using a standard cartridge gun?
The 600 ml foil-pack version requires an applicator designed for foil packs. The manufacturer allows application using a suitable manual, battery-powered or pneumatic applicator equipped with a plunger.
Product safety
Manufacturer
Henkel Polska Sp. z o.o.
Domaniewska 41
02-672 Warszawa, Poland
Responsible person in the EU
Henkel Polska Sp. z o.o.
Domaniewska 41
02-672 Warszawa, Poland
Reviews
If you've added a review and it doesn't appear on the list, it may be pending moderation.
Leave feedback on the product
Log in with Google
