Tork 205525 AC/DC power supply for automatic H1 and H5 hand towel dispensers
Product code: 205525
Leave feedback on the product
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Secure purchase guarantee
Product description
Tork 205525 – AC/DC power supply for automatic H1 and H5 hand towel dispensers
Tork 205525 is an original AC/DC power kit designed for selected Tork Matic H1 and Tork PeakServe H5 automatic hand towel dispensers. It allows a compatible dispenser to be powered directly from a mains socket instead of using four alkaline D-cell batteries.
The solution is intended for facilities where a permanent mains power supply for automatic dispensers is preferred, including production plants, warehouses, offices, public buildings, service facilities and washrooms with regular traffic.
Alternative to battery power
The Tork 205525 kit allows the battery power supply of a compatible dispenser to be replaced with mains power. This eliminates the need to regularly replace four D-cell batteries while the device is operated with the power supply connected.
The change of power source is reversible. If the user wants to return to battery operation, the manufacturer recommends disconnecting the power kit, following the installation procedure in reverse order and installing four alkaline D-cell batteries in accordance with the dispenser instructions.
Tork 205525 compatibility
The manufacturer confirms compatibility of the 205525 power kit with the following automatic dispensers:
- Tork PeakServe 552504 – white automatic continuous hand towel dispenser H5 system,
- Tork PeakServe 552509 – black automatic continuous hand towel dispenser H5 system,
- Tork Matic 551100 – white automatic hand towel roll dispenser H1 system,
- Tork Matic 551108 – black automatic hand towel roll dispenser H1 system.
Important: Tork 205525 is not compatible with Tork Matic dispensers equipped with the Intuition sensor. The manufacturer specifies a different power solution for these devices.
Tork 205525 for H1 and H5 systems
The kit can be used with selected Tork Matic automatic dispensers belonging to the H1 system as well as selected Tork PeakServe automatic dispensers belonging to the H5 system.
This does not mean that it is compatible with every device in the H1 and H5 systems. When selecting the power kit, the specific dispenser model number and the manufacturer's compatibility list should always be checked.
Key features of the Tork 205525 kit
- allows a compatible dispenser to be powered from a mains socket instead of four alkaline D-cell batteries,
- designed for selected Tork Matic H1 and Tork PeakServe H5 automatic dispensers,
- supports a wide input voltage range of 100–240 V AC,
- operates at 50–60 Hz,
- provides an output voltage of 5.95 V DC and an output current of 2.52 A,
- power output is 15 W,
- designed for indoor use,
- allows a later return to battery operation.
Safety and correct installation
Before connecting the power kit, all batteries must be removed from the dispenser. The manufacturer explicitly states that the batteries must be removed before the power supply is connected.
After removing the batteries, installation should be carried out in accordance with the instructions for the relevant dispenser model. The kit uses a component installed inside the device and a cable routed to the mains power supply.
The device is intended for indoor use only. The manufacturer does not permit outdoor use. Access to the service area should only be granted to persons with appropriate knowledge and practical experience of the appliance, particularly with regard to safety and hygiene.
The supplied part of the system operates at SELV safety extra-low voltage. This should not, however, be interpreted as confirmation that the kit can be used in arbitrary humidity conditions or where it may be exposed to water. Installation should be carried out in accordance with the manufacturer's instructions and the conditions applicable at the installation site.
Technical data
| Parameter | Value |
|---|---|
| Brand | Tork |
| Manufacturer | Essity Hygiene and Health AB |
| Article number | 205525 |
| Product type | AC/DC power kit for automatic hand towel dispensers |
| Compatible systems | H1 Tork Matic and H5 Tork PeakServe – selected models |
| Compatible models | 551100, 551108, 552504, 552509 |
| Input voltage | 100–240 V AC |
| Frequency | 50–60 Hz |
| Input current | 1.0 A |
| Output voltage | 5.95 V DC |
| Output current | 2.52 A |
| Output power | 15 W |
| Net weight | 502 g |
| Gross weight | 572 g |
| Unit dimensions | 276 × 109 × 68 mm |
| EAN | 7322542476123 |
| Use | Indoor use |
Storage
Storage and operating conditions should be followed in accordance with the power kit instructions and the instructions for the relevant dispenser. The manufacturer does not specify a separate storage temperature range for the Tork 205525 kit in the available materials, therefore unconfirmed temperature values should not be used.
For professional and facility applications
Mains power can be a practical solution in locations where automatic dispensers are used intensively or regularly and where access to a suitable electrical socket allows the device to remain connected to a permanent power source.
Tork 205525 can be used in industrial facilities, warehouses, production plants, office buildings, logistics centres, retail and service facilities and other locations equipped with compatible Tork automatic dispensers.
Using the power supply does not change the operating requirements of the dispenser itself. The operating instructions, cleaning recommendations and safety rules applicable to the specific dispenser model must still be followed.
FAQ
Does Tork 205525 replace the batteries in an automatic dispenser?
Yes. In compatible Tork models, the 205525 kit allows the dispenser to be powered from a mains socket instead of four alkaline D-cell batteries. All batteries must be removed from the device before the power supply is connected.
Which dispensers are compatible with Tork 205525?
The manufacturer confirms compatibility with Tork 551100, 551108, 552504 and 552509 dispensers. These are selected automatic devices from the Tork Matic H1 and Tork PeakServe H5 systems.
Is Tork 205525 compatible with every H1 and H5 dispenser?
No. H1 and H5 identify Tork systems, but the 205525 kit is not automatically compatible with every dispenser belonging to those systems. The specific dispenser model number should be checked before purchase.
Is Tork 205525 compatible with Matic dispensers with an Intuition sensor?
No. The manufacturer explicitly states that the 205525 kit is not compatible with Tork Matic dispensers equipped with the Intuition sensor. A different power solution is specified for these devices.
Do the batteries have to be removed before connecting the power supply?
Yes. The manufacturer's instructions require all batteries to be removed before the power kit is connected. Batteries must not remain installed in the dispenser while the power supply is being used.
Can the dispenser be switched back to battery power after installing the power kit?
Yes. The manufacturer allows a return to battery operation. The power kit should be disconnected, the installation procedure followed in reverse order and four alkaline D-cell batteries installed in accordance with the dispenser instructions.
What are the electrical specifications of Tork 205525?
The power supply operates with an input voltage of 100–240 V AC, a frequency of 50–60 Hz and an input current of 1.0 A. Output parameters are 5.95 V DC, 2.52 A and 15 W.
Can Tork 205525 be used outdoors?
No. The manufacturer's instructions state that the device is not intended for outdoor use. It should be used indoors and installed in accordance with the requirements applicable to the relevant dispenser.
Reviews
If you've added a review and it doesn't appear on the list, it may be pending moderation.
Leave feedback on the product
Log in with Google
