Vibra-Tite 5600 50 g low odour cyanoacrylate adhesive with low blooming
Product code: 15045079
Leave feedback on the product
Related products
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Secure purchase guarantee
Opis produktu
Vibra-Tite 5600 50 g – low odour cyanoacrylate adhesive with reduced blooming
Vibra-Tite 5600 50 g is a single-component, high-viscosity cyanoacrylate adhesive with low odour and a reduced tendency to form white deposits around the bond line. It is particularly suitable for assembling small components where fast bonding and an attractive finish are important.
Brand change: this product was previously marketed as Cyberbond CB 5600. H.B. Fuller has introduced the Vibra-Tite brand while maintaining the existing formulation and product properties. During the transition period, the product may still be supplied in packaging bearing the Cyberbond name.
Applications of Vibra-Tite 5600
The adhesive is designed for fast bonding of properly prepared metal surfaces, selected plastics and elastomers, including EPDM rubber. It can be used for small-component assembly, maintenance work and small-batch manufacturing.
The 50 g package is particularly useful for manual application, small adhesive quantities and technological trials.
What makes Vibra-Tite 5600 different?
Low blooming reduces the formation of visible white deposits around the bond line, a phenomenon associated with some conventional cyanoacrylate adhesives. This is particularly important when the appearance of bonded components matters.
Low odour and reduced outgassing improve application comfort compared with conventional cyanoacrylates with a more noticeable smell. Appropriate workplace ventilation is still required.
High viscosity of 800–1500 mPa·s helps control the quantity of adhesive applied and limits excessive spreading across the surface. The product also provides some ability to fill small gaps.
When should you choose Vibra-Tite 5600?
Vibra-Tite 5600 is worth considering when conventional instant adhesives cause visible white deposits around the joint or when a strong adhesive odour makes application uncomfortable. It is suitable for applications requiring controlled, precise adhesive dispensing.
Important application considerations
Low odour cyanoacrylate adhesives may provide lower bond strength than conventional ethyl ester-based cyanoacrylates. For demanding mechanical applications, tests should be performed on the actual substrates.
Low-surface-energy plastics such as PP and PE may require additional surface preparation with a suitable primer.
Technical data – Vibra-Tite 5600 50 g
| Parameter | Value |
|---|---|
| Manufacturer | H.B. Fuller |
| Brand | Vibra-Tite (formerly Cyberbond) |
| Product type | Single-component cyanoacrylate adhesive |
| Chemical base | Alkoxy ester |
| Package size | 50 g |
| Appearance | Colourless, transparent |
| Viscosity at 20°C | 800–1500 mPa·s |
| Density at 20°C | 1.1 g/cm³ |
| Service temperature of cured adhesive | -30°C to +70°C |
| Fixture time on steel | 10–55 seconds |
| Fixture time on EPDM | 3–30 seconds |
| Fixture time on ABS | 20–30 seconds |
| EAN | 5907090043007 |
| Melkib SKU | 15045079 |
Storage
Store in a cool, dark place in the original, tightly closed container. Allow the adhesive to reach ambient temperature before application. Follow the recommendations provided in the current safety data sheet and on the product label.
FAQ – frequently asked questions
Does Vibra-Tite 5600 completely eliminate white blooming?
No. The adhesive has a reduced tendency to form white deposits, but the final result also depends on the adhesive quantity, surface preparation and application conditions.
Is Vibra-Tite 5600 suitable for bonding EPDM rubber?
Yes. EPDM is one of the substrates included in the manufacturer's technical documentation. The indicative fixture time is 3–30 seconds, depending on application conditions.
Does low odour mean that ventilation is unnecessary?
No. Adequate ventilation must be provided when applying cyanoacrylate adhesives. Personal protective equipment should be selected according to the current safety data sheet.
Files to download
Product safety
Manufacturer
HB Fuller Europe GmbH
WERNER-VON-SIEMENS-STR. 2
31515 Wunstorf, Germany
Responsible person in the EU
HB Fuller Europe GmbH
WERNER-VON-SIEMENS-STR. 2
31515 Wunstorf, Germany
Reviews
If you've added a review and it doesn't appear on the list, it may be pending moderation.
Leave feedback on the product
