WIKO REPAIR 30 2K 50 ml, fast polyurethane adhesive, 0.5 min open time, sandable 2–5 min, black, plastics & metals
Product code: REP30.K50
Leave feedback on the product
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Related products
Secure purchase guarantee
Product description
WIKO REPAIR 30 2K 50 ml is a two-component polyurethane adhesive for fast repairs and filling on plastics and metals. It offers a very short open time of approx. 0.5 min and can be sanded after 2–5 min, forming a strong black bond line.
Benefits and unique features
- Rapid return to processing – minimal downtime
- High impact and weather resistance
- Neat black bond for visible repairs
- Post-cure drilling, sanding, cutting and painting
- Stable rheology for easy bead shaping during gel phase
Properties and applications
- Plastic & metal repairs: bumpers, trims, covers; PVC, PC, ABS; steel and aluminium (after prep)
- Gap filling & edge rebuilds: fast set speeds up bodywork
- Service conditions: resistant to water, oils, fuels and common solvents
- Best practice: apply at ~+22 °C; 1:1 mix ratio with a static mixer
Technical parameters
| Parameter | Value |
|---|---|
| Chemistry | 2-part polyurethane (polyol + isocyanate) |
| Cured colour | black |
| Mix ratio | 1 : 1 (vol.) |
| Open time (20–22 °C) | approx. 0.5 min |
| Sandable after | 2–5 min |
| Density (uncured) | ≈ 1.3 g/cm³ |
| Viscosity (uncured) | ≈ 30 000 mPa·s |
| Gap-filling ability | up to ≈ 3 mm |
| Shear strength | ≈ 12–15 N/mm² |
| Hardness (Shore D) | ≈ 65–70 |
| Elongation at break | ≈ 200 % |
| Service temperature | ≈ -40 to +120 °C |
| Pack size | 50 ml (dual cartridge) |
Storage recommendations
Store tightly closed in a cool, dry and dark place at approx. +10 to +20 °C. Shelf life up to 12 months in unopened original packaging.
FAQ
How does REPAIR 30 compare to REPAIR 90? REPAIR 30 is faster (0.5 min / 2–5 min), while REPAIR 90 offers a longer 4–6 min open time.
Is the joint paintable? Yes—after cure you can drill, sand, cut and paint.
Surface prep? Abrade and degrease; dispense 1:1 through a static mixer.
Typical substrates? PVC, PC, ABS; steel and aluminium after proper preparation.
Product safety
Manufacturer
GLUETEC Industrieklebstoffe GmbH & Co. KG
Am Biotop 8a
97259 Greußenheim, Germany
Responsible person in the EU
GLUETEC Industrieklebstoffe GmbH & Co. KG
Am Biotop 8a
97259 Greußenheim, Germany
Reviews
If you've added a review and it doesn't appear on the list, it may be pending moderation.
Leave feedback on the product
Log in with Google
