WINKEL Water Finding Paste 100 g water detection paste for tanks

WINKEL Water Finding Paste 100 g water detection paste for tanks

WINKEL Water Finding Paste 100 g is an indicator paste used to detect water at the bottom of tanks containing oil, fuel and other technical fluids. It helps quickly check whether water has accumulated in the tank, which may affect fluid quality, increase corrosion risk and cause operational issues.

The paste changes colour after contact with water, giving a simple visual indication. It is a practical product for maintenance, service teams, fuel storage, workshops, oil management and facilities that store or inspect technical fluids in tanks.

Applications of WINKEL Water Finding Paste

WINKEL Water Finding Paste is used to check for the presence of water in tanks, drums and containers used for oils, fuels and other technical media. It is especially useful where water may collect at the bottom and cannot be detected by simple visual inspection.

The product can be used during periodic inspection of storage tanks, oil drums, working containers, technical systems and locations where quick detection of water contamination is required.

What makes WINKEL Water Finding Paste 100 g different

The key feature is the clear colour change after contact with water. Product trade data indicates that the paste changes from green to light pink, making it easy to read the result without specialised measuring equipment.

The 100 g packaging is convenient for inspection and service work. The product can be used as a simple supporting tool in the quality control of fuels, oils and technical fluids stored in tanks.

When to choose WINKEL Water Finding Paste

Choose WINKEL Water Finding Paste when you need to quickly check whether water is present at the bottom of a tank, drum or container. It is suitable for oil management, fuel storage, tank service, incoming inspection and routine maintenance.

How to use water finding paste

Apply a thin layer of paste to a measuring element, such as a dip tape or gauging rod used for tank inspection. Then insert the measuring element into the tank so that it reaches the lower zone where water may accumulate.

After removing the measuring element, check whether the paste has changed colour. A colour change indicates contact with water and helps identify the presence of a water layer at the checked level.

Important notes before use

The product is used for detecting water, not for removing or neutralising it. If water is detected in the tank, further action should be selected according to the fluid type, tank design and internal procedures.

Before use in critical applications, check the current manufacturer’s TDS and SDS and make sure that the inspection method is consistent with the applicable measurement procedure.

Technical data of WINKEL Water Finding Paste 100 g

Storage

Store in the original tightly closed packaging, in a dry and clean place. Protect from contamination and accidental contact with water, as the product acts as a moisture indicator. Detailed storage conditions should be verified in the current manufacturer’s SDS and TDS.

FAQ

How can I check whether there is water in an oil tank?

WINKEL Water Finding Paste can be used for this type of inspection. The paste changes colour after contact with water, helping detect water collected at the bottom of the tank.

Does WINKEL Water Finding Paste remove water from the tank?

No. The product is used to detect water, not to remove it. If water is detected, an appropriate draining, separation or tank service procedure should be used.

How does WINKEL Water Finding Paste change colour?

According to product trade data, the paste changes from green to light pink after contact with water.

Where is water finding paste used?

It is used for checking tanks, drums and containers with oil, fuel or other technical fluids where water may collect at the bottom.

Should I check the TDS and SDS before use?

Yes. For industrial applications and responsible inspections, always check the current manufacturer’s technical data sheet and safety data sheet.

Choose WINKEL Water Finding Paste 100 g when you need a simple indicator for quick detection of water in tanks containing oil, fuel or other technical fluids.