ANDEROL S-68-A 20 L semi-synthetic rotary compressor oil ISO VG 68

ANDEROL S-68-A 20 L – semi-synthetic rotary compressor oil ISO VG 68

Choosing the correct lubricant is essential for reliable industrial compressor operation. Viscosity is important, but so are the base oil technology, lubricating properties and compatibility with the equipment manufacturer's requirements.

ANDEROL S-68-A is a semi-synthetic rotary compressor lubricant formulated with hydrocracked and iso-dewaxed hydrocarbon base fluids. Its formulation includes performance additives designed to provide effective lubricating properties during operation.

The product belongs to the ISO VG 68 viscosity grade and meets or exceeds DIN 51506 requirements, according to the manufacturer. It is supplied in an original 20-litre container.

Applications of ANDEROL S-68-A

ANDEROL S-68-A is designed for lubricating rotary compressors where the equipment manufacturer specifies a lubricant with suitable viscosity and performance characteristics.

Typical application areas include:

• Rotary compressors – lubrication in accordance with the equipment manufacturer's technical requirements.
• Industrial compressed air systems – compressors requiring an ISO VG 68 lubricant with appropriate properties.
• Industrial maintenance – scheduled lubricant replacement and topping up in compatible industrial compressors.
• Manufacturing facilities – servicing compression equipment requiring a dedicated compressor lubricant.

Always check the compressor manufacturer's recommendations concerning viscosity, lubricant type and operating conditions before use.

Key benefits of ANDEROL S-68-A

Semi-synthetic base oil technology

ANDEROL S-68-A uses hydrocracked and iso-dewaxed hydrocarbon base fluids. The manufacturer identifies the product as a semi-synthetic rotary compressor lubricant.

Performance additive package

The formulation contains high-performance additives designed to provide suitable lubricating properties in the intended compressor applications.

ISO VG 68 viscosity grade

The product belongs to the ISO VG 68 viscosity grade, making it easier to identify when selecting a lubricant according to the technical documentation of the equipment.

Compliance with DIN 51506 requirements

According to the manufacturer, ANDEROL S-68-A meets or exceeds the requirements of DIN 51506, a specification relating to compressor lubricating oils.

When should you choose ANDEROL S-68-A?

ANDEROL S-68-A should be considered when the compressor documentation specifies ISO VG 68 viscosity and the equipment's technical requirements are compatible with the properties of this lubricant.

For maintenance teams, clear product identification is important. Engineers and purchasing departments can use the viscosity grade, formulation information and declared specification to assess whether the lubricant meets their requirements.

What should you check before purchasing or changing the oil?

• Viscosity grade: verify that the compressor manufacturer specifies ISO VG 68.
• Equipment type: confirm that the lubricant is suitable for the specific compressor design.
• Specification: compare the equipment requirements with the manufacturer's declared compliance with DIN 51506.
• Previously used lubricant: verify suitability for replacement and any requirements concerning oil changes or mixing.
• Operating conditions: consider operating temperature, equipment load and the compressor manufacturer's instructions.

Important: two compressor oils with the same ISO VG 68 viscosity grade are not automatically interchangeable. The final selection must be based on the full technical requirements of the equipment.

Melkib Academy – what does ISO VG 68 mean?

ISO VG 68 is a kinematic viscosity grade based on oil viscosity at 40°C. It is one of the fundamental parameters used when selecting lubricants for machinery.

However, the ISO VG 68 designation alone does not specify the base oil type, additive composition or complete operating characteristics.

When selecting compressor oil, it is therefore important to check the required viscosity grade, the product specification and the equipment manufacturer's recommendations.

Technical data – ANDEROL S-68-A 20 L

Storage

Store ANDEROL S-68-A in its original, tightly closed container and protect it from contamination. Detailed storage and safe handling conditions should follow the manufacturer's current safety data sheet.

FAQ – frequently asked questions about ANDEROL S-68-A

Is ANDEROL S-68-A a synthetic oil?

The manufacturer identifies ANDEROL S-68-A as a semi-synthetic rotary compressor lubricant. It is formulated with hydrocracked and iso-dewaxed hydrocarbon base fluids and performance additives.

What equipment is ANDEROL S-68-A designed for?

The product is designed for rotary compressors. Before use, check that the requirements of the specific equipment are compatible with the lubricant's properties.

Does ANDEROL S-68-A meet DIN 51506 requirements?

Yes. According to the manufacturer, ANDEROL S-68-A meets or exceeds DIN 51506 requirements.

Can ANDEROL S-68-A replace another ISO VG 68 compressor oil?

Interchangeability cannot be confirmed based on viscosity grade alone. Before switching lubricants, compare the product specifications, the compressor manufacturer's requirements and the operating conditions.

Are ANDEROL S-68-A and ANDEROL S-68 the same product?

There is insufficient evidence to automatically consider the two product designations equivalent. If replacing a previously used lubricant, technical compatibility should be confirmed for the specific application.

What does ISO VG 68 mean?

ISO VG 68 defines a kinematic viscosity grade at 40°C. It is an important selection parameter but does not describe all lubricant characteristics.

Can ANDEROL S-68-A be mixed with another compressor oil?

Do not assume that mixing is permitted without confirmation of compatibility. Before topping up or replacing the lubricant, consult the relevant technical documentation and the equipment manufacturer's recommendations.

How often should ANDEROL S-68-A be changed?

The confirmed product information does not specify a universal oil change interval. The replacement schedule should be based on the compressor manufacturer's instructions, actual operating conditions and oil condition monitoring recommendations.