ARALDITE 2022-1 2K methacrylate adhesive 50 ml with mixer for metals plastics and composites
Product code: 4747208
Leave feedback on the product
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Secure purchase guarantee
Product description
ARALDITE 2022-1 50 ml – two-component methacrylate adhesive for metals plastics and composites
ARALDITE 2022-1 is a two-component structural methacrylate adhesive designed for durable bonding of metals plastics and composite materials. It cures at room temperature and forms strong structural joints.
Applications
The adhesive can be used for bonding materials including aluminium steel PVC polycarbonate acrylic materials other suitable thermoplastics and composites. It is suitable for manufacturing repairs technical service and assembly applications requiring a durable structural bond.
Key properties
2K technology: two components mixed at a 1:1 ratio.
Working time: approximately 10 minutes at 25°C.
Thixotropic consistency: helps reduce adhesive run-off during application.
Gap filling: up to 4 mm.
Versatile use: suitable for metals plastics and composites.
Application
Surfaces to be bonded should be clean dry and degreased. Components A and B must be mixed at a 1:1 ratio. The 50 ml cartridge is designed for use with a suitable dispenser and static mixer which ensures uniform mixing of both components.
Technical data
| Parameter | Value |
|---|---|
| Technology | 2K methacrylate |
| Mixing ratio A:B | 1:1 by volume and weight |
| Colour after mixing | pale yellow |
| Consistency | thixotropic |
| Density after mixing | approximately 1 g/cm³ |
| Working time at 25°C | approximately 10 minutes |
| Maximum gap filling | up to 4 mm |
| Tensile strength | typically 45 MPa |
| Tensile modulus | typically 1700 MPa |
| Elongation at break | typically >5% |
| Capacity | 50 ml |
| Packaging | dual cartridge with static mixer |
Storage
Store the product in its original tightly closed packaging at 2°C to 8°C. Under these conditions the stated storage life is 24 months. Before use the product may be allowed to reach room temperature. The total storage time at room temperature should not exceed 9 months. Prolonged storage above 25°C may reduce product shelf life.
Safety
The uncured components of ARALDITE 2022-1 are hazardous mixtures. Use the product in accordance with the current safety data sheets for components A and B wear appropriate personal protective equipment and provide adequate ventilation. Keep the product away from ignition sources.
FAQ
Which materials can ARALDITE 2022-1 bond?
The adhesive is suitable for materials including metals aluminium steel PVC polycarbonate acrylic materials other suitable plastics and composites. For unusual substrates an adhesion test is recommended before use.
What is the mixing ratio?
Components A and B are mixed at a 1:1 ratio. The dual cartridge allows both components to be dispensed simultaneously through a static mixer.
What is the working time?
The typical working time is approximately 10 minutes at 25°C. Ambient temperature and the temperature of the bonded parts affect the reaction rate.
Can the adhesive fill gaps?
Yes. The manufacturer specifies gap filling of up to 4 mm.
Do the surfaces need to be prepared?
Yes. The surfaces should be clean dry and degreased. Proper surface preparation improves the durability of the bond.
Does the 50 ml cartridge require a dispenser?
Yes. The 50 ml dual cartridge is designed for use with a suitable 1:1 two-component cartridge dispenser and a compatible static mixer.
Reviews
If you've added a review and it doesn't appear on the list, it may be pending moderation.
Leave feedback on the product
Log in with Google
