Anti-Seize assembly paste 120g high temperature grease, anti-corrosion, prevents screws from seizing, reduces friction, dismantles threaded connections
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Secure purchase guarantee
Opis produktu
WEICON Anti-Seize 120 g – assembly paste for bolts and metal joints up to 1200°C
WEICON Anti-Seize 120 g is a high-temperature assembly paste designed to protect metal mechanical connections against seizing, galling and corrosion. It forms a separating layer between mating metal surfaces, reducing the risk of components becoming stuck together during operation.
Seized bolts, difficult disassembly of threaded connections and corrosion of assembly components can significantly increase maintenance time. WEICON Anti-Seize helps reduce these problems by protecting metal surfaces against wear and facilitating subsequent disassembly.
Temperature resistance from -180°C to +1200°C makes this paste suitable for demanding industrial conditions, machinery assembly, maintenance work and industrial plant servicing.
Applications of WEICON Anti-Seize assembly paste
WEICON Anti-Seize is intended for protecting heavily loaded metal components, particularly where high temperatures, surface pressure or a risk of corrosion and seizing are present.
Typical applications
Threaded connections: protecting bolts, nuts and other threaded metal components against seizing and corrosion.
Machinery and equipment assembly: protecting contact surfaces of components exposed to high loads and difficult subsequent disassembly.
Industrial maintenance: protecting connections during scheduled inspections and servicing to reduce problems during future disassembly.
High-temperature conditions: protecting appropriately selected metal connections operating at elevated temperatures.
What makes WEICON Anti-Seize different?
Protection against seizing and cold welding
The paste contains carefully selected solid ingredients and additives that help separate mating metal surfaces. It reduces the risk of galling, fretting corrosion and unwanted adhesion between surfaces under pressure.
High temperature resistance
The temperature resistance range from -180°C to +1200°C allows the paste to be used under demanding thermal conditions. Product selection must also consider load, component materials and operating conditions.
Reduced friction and corrosion protection
WEICON Anti-Seize helps reduce stick-slip, an irregular movement caused by alternating friction and adhesion between surfaces. Its separating and anti-corrosion properties support the durability of protected connections.
Silicone-free formulation
Standard WEICON Anti-Seize paste does not contain silicone. It is based on a synthetic oil mixture containing solid ingredients and functional additives.
When should Anti-Seize paste be used instead of conventional grease?
WEICON Anti-Seize is particularly suitable when the main objective is to protect an assembly connection against seizing, corrosion and difficult disassembly.
Important distinction: Anti-Seize assembly paste does not replace conventional lubricating oils or greases in systems requiring continuous lubrication. It should not be treated as a universal lubricant for bearings or guide rails.
For bolted connections, the influence of the paste on friction and clamping force must be considered. Tightening torque should comply with the technical requirements of the specific connection.
How to apply WEICON Anti-Seize
1. Surface preparation: remove contamination and residues of substances that may interfere with correct application. Degrease the surfaces if necessary.
2. Paste application: spread an appropriate amount of paste evenly over the surface using a brush, cloth or sponge.
3. Thread protection: apply the paste to the mating surfaces of threaded components according to assembly requirements.
4. Assembly: connect the components and tighten them according to the applicable technical specification, taking the lubricating properties of the paste into account.
Do not mix WEICON Anti-Seize with other greases or oils without confirming compatibility.
Technical data – WEICON Anti-Seize 120 g
| Parameter | Value |
|---|---|
| Manufacturer | WEICON |
| Product type | Anti-seize assembly paste |
| Product number | 10040340 |
| Net weight | 120 g |
| Colour | Anthracite |
| Oil base | Synthetic oil mixture |
| Silicone content | Silicone-free |
| Temperature resistance | -180°C to +1200°C |
| Coefficient of friction (according to TDS) | 0.13 |
| Pressure load resistance | 230 N/mm² |
| Water resistance (DIN 51807) | 0-90 |
| Salt spray test resistance | More than 170 hours |
| CLP classification – selected hazards | Eye Dam. 1; Aquatic Chronic 1 |
| Signal word | Danger |
| Hazard statements | H318, H410 |
Storage
Store WEICON Anti-Seize in its tightly closed original container in a dry place at room temperature. Do not store together with oxidising substances.
According to the manufacturer's technical data sheet, the minimum shelf life in the original unopened container is 24 months when stored under appropriate conditions.
Safety information
Danger. Causes serious eye damage (H318). Very toxic to aquatic life with long lasting effects (H410).
Use appropriate eye protection during application and avoid release into the environment. Keep out of reach of children. Read the current product label and WEICON Anti-Seize safety data sheet before use.
FAQ – frequently asked questions
Does WEICON Anti-Seize prevent bolts from seizing?
Yes. The paste is designed to protect metal surfaces against seizing, corrosion and galling. It facilitates subsequent disassembly, although effectiveness also depends on operating conditions.
Is Anti-Seize paste suitable for high temperatures?
Yes. The manufacturer specifies temperature resistance from -180°C to +1200°C. However, this does not mean that every mechanical component can operate throughout this entire temperature range.
Can WEICON Anti-Seize replace bearing grease?
No. It is primarily an assembly paste with anti-seize and separating properties. The manufacturer states that it does not replace lubrication with conventional oils or greases.
Does Anti-Seize work like a threadlocker?
No. Anti-Seize paste is used to reduce seizing and facilitate disassembly. It is not an anaerobic threadlocker designed to prevent threaded connections from loosening.
What is the difference between WEICON Anti-Seize and Anti-Seize High-Tech?
Standard WEICON Anti-Seize paste is anthracite-coloured and offers temperature resistance up to +1200°C. Anti-Seize High-Tech is white, metal-free, withstands temperatures up to +1400°C and has NSF H1 registration. The two products should not automatically be considered interchangeable.
Does WEICON Anti-Seize contain silicone?
No. According to WEICON's technical documentation, the standard Anti-Seize paste does not contain silicone.
How should Anti-Seize paste be applied to bolts and nuts?
Clean the surfaces and apply the paste evenly to the components to be protected. During assembly, use the required tightening torque while considering the lubricating properties of the paste.
Product safety
Responsible person in the EU
WEICON GmbH & Co. KG
Königsberger Str. 255
48157 Münster, Germany
Reviews
If you've added a review and it doesn't appear on the list, it may be pending moderation.

