CRC Industrial ECO Degreaser 500 ml Industrial Cleaner NSF A8 K1
Product code: 1032701
Leave feedback on the product
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Secure purchase guarantee
Opis produktu
CRC Industrial ECO Degreaser 500 ml – Fast-Drying Industrial Cleaner NSF A8/K1
CRC Industrial ECO Degreaser FPS 500 ml is a powerful, fast-drying solvent-based cleaner designed to remove oil, grease, lubricants, tar, adhesive residues and industrial contamination from machinery, tools and mechanical components. Its fast evaporation helps reduce maintenance downtime and leaves surfaces free from residue.
Suitable for industrial maintenance, production facilities and mechanical workshops, the product is also NSF A8/K1 registered (No. 162737) for specified cleaning applications in food processing environments, subject to the conditions of registration.
Applications
- Cleaning and degreasing industrial machinery and mechanical parts.
- Removing oil, grease and lubricants from metal surfaces.
- Cleaning motors, engines and drive mechanisms.
- Degreasing mechanical brakes and clutches.
- Maintenance of pumps, compressors and pneumatic tools.
- Cleaning chains, wire ropes, cables and forklift components.
- Removing contamination from dies, moulds and production tools.
- Maintenance operations in food processing facilities.
Key Benefits
- Fast evaporation – helps minimise equipment downtime.
- Powerful cleaning action – dissolves grease, oil, tar, lubricants and adhesive residues.
- Residue-free cleaning – leaves no deposits after evaporation.
- NSF A8/K1 registration – suitable for specified cleaning applications in food processing environments.
- Acetone-free formula – contains no chlorinated solvents.
- Compatible with most common plastics – preliminary testing is recommended on sensitive materials.
- Over 95% active product content – uses CO2 as the aerosol propellant.
- 360° spray valve – allows application even when the can is inverted.
Directions for Use
- Switch off the equipment and ensure that components are not electrically energised.
- Provide adequate ventilation.
- Spray directly onto contaminated surfaces, allowing dissolved contaminants to drain away.
- Allow to air dry or wipe off excess product using an absorbent cleaning cloth.
- Repeat if necessary.
- Allow the product to evaporate completely and vapours to disperse before restarting the equipment.
- Re-lubricate moving components where lubrication is required.
Technical Specifications
| Parameter | Value |
|---|---|
| Manufacturer | CRC Industries |
| Product name | Industrial ECO Degreaser FPS |
| Manufacturer part number | 33344-AA |
| Product type | Solvent-based industrial degreaser |
| Packaging | 500 ml aerosol |
| Colour | Colourless |
| Specific gravity at 20°C | 0.802 (without propellant) |
| Flash point | 12°C (without propellant) |
| Biodegradability | 62% according to OECD 301B |
| NSF registration | A8/K1, No. 162737 |
| Active product content | Over 95% |
| Propellant | CO2 |
| Application system | 360° spray valve |
| Formula | Acetone-free, without chlorinated solvents |
Limitations and Safety
The product is flammable. Keep away from flames, heat and ignition sources. Do not use on energised electrical equipment. Ensure complete evaporation and adequate ventilation before restarting machinery.
Test sensitive plastics, painted surfaces and other delicate materials before use. NSF A8/K1 registration does not authorise direct contact with food.
Storage
Store in the original container in a well-ventilated area, away from heat, ignition sources and direct sunlight. Refer to the current safety data sheet for detailed storage and handling requirements.
Expert Advice – Choosing an Industrial Degreaser
When selecting a cleaning product for maintenance work, consider its cleaning performance, evaporation rate, material compatibility and hygiene requirements. CRC Industrial ECO Degreaser combines rapid cleaning with NSF A8/K1 registration for relevant applications in food processing environments.
Frequently Asked Questions
Can CRC Industrial ECO Degreaser be used in food processing facilities?
Yes. It is NSF A8/K1 registered under number 162737. The product must be used according to the registration conditions.
Does it remove grease and oil?
Yes. It is designed to dissolve and remove grease, oils, lubricants and other industrial contaminants. Repeat cleaning if necessary.
Is it compatible with plastic components?
The product is compatible with most common plastics. Always test sensitive materials on a small area before full application.
Is re-lubrication required after cleaning?
Yes, when cleaning components that require lubrication during operation. The product removes existing lubricants as well as contamination.
Can it be used on live electrical equipment?
No. Disconnect the power supply before use and allow complete drying and vapour dispersion before restarting the equipment.
Reviews
If you've added a review and it doesn't appear on the list, it may be pending moderation.
Leave feedback on the product
