Cleaner for liquid instant adhesives (cyanoacrylates) from the Sicomet D-Bonder dosing systems 500 g
Description
Properties
This product is used to clean residues of cyanoacrylate adhesives from automatic CA adhesive dosing systems. Sicomet D-bonder is only used to remove non-cured - liquid adhesives.
Application
- Removal of uncured cyanoacrylate adhesives from dispensing systems and glued details
Advantages
- allows for effective cleaning of surfaces from uncured instant glue
How to use
product can be used in two ways: you can soak the cleaning cloth and wash the residual glue from the detail. The second way is to leave the soaked fleece on the glue for about 5 minutes, then wipe the glue with circular movements.
It is very important before use to check that Sicomet D-bonder does not react with the cleaned material - it does not dissolve or discolor it
Cleaning dosing systems
1. Place the container with D-bonder in the tank and insert a Teflon hose into it which supplies the cyanoacrylate adhesive dosing system.
2. Place a container under the valve, into which we drain the remains of glue and D-bonder. The resulting waste is classified as hazardous.
3. Clean the system until only Sicomet D-bonder flies from the dosing valve.
4. Remove D-bonder from the tank and blow out the system with air only. Yes, to remove any residual D-bonder from the system and dry it.
5. The system cleaned in this way can be stored until refilled with cyanoacrylate glue.
Storage
ideal way to store the product is to leave the product in closed containers in a cool and dry place at a temperature between 8 ° C and 21 ° C. The product is stored for 12 months from the date of production. To avoid contamination of the cleaning agent, do not put the remnants of the product back into the original container.