WIKO Super Glue Remover 20 ml cyanoacrylate adhesive remover
Product code: SGR.F20
Leave feedback on the product
Select product variant:
Individual variants may differ in price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Secure purchase guarantee
Opis produktu
WIKO Super Glue Remover 20 ml – cyanoacrylate adhesive remover
How can you remove dried instant adhesive without excessive mechanical scraping? WIKO Super Glue Remover 20 ml is a specialist cleaning agent developed to remove residues of cyanoacrylate (CA) adhesives, commonly known as super glue. It helps dissolve adhesive residues so they can be removed during cleaning, maintenance or reworking of bonded components.
The remover can be used in workshops, maintenance operations and for cleaning accidental adhesive contamination. Its suitability for individual surfaces must always be checked before application.
Applications of WIKO Super Glue Remover
The product is primarily intended for removing cyanoacrylate adhesive residues from metal and glass surfaces. The manufacturer also identifies upholstery, textiles and selected plastics as possible applications.
Typical applications include:
- removing dried instant adhesive residues from metal and glass,
- cleaning surfaces after assembly and bonding operations,
- removing CA adhesive contamination from selected plastic components,
- treating adhesive residues on upholstery and textiles after confirming material compatibility.
Key benefits of WIKO Super Glue Remover 20 ml
Designed for CA adhesives: the remover acts on cyanoacrylate adhesive residues, making them easier to remove without relying solely on mechanical scraping.
Simple application: apply the liquid to the adhesive residue, allow it to act for several minutes, then wipe or scrape away the loosened adhesive.
Compact 20 ml packaging: suitable for localised cleaning and small maintenance or repair tasks.
When should you choose this adhesive remover?
WIKO Super Glue Remover is suitable when cyanoacrylate adhesive residues remain on a surface following assembly, repair or accidental contamination. It provides chemical assistance when removing unwanted adhesive deposits.
The product should not be assumed to work with every adhesive type or substrate. Other adhesive technologies and chemically sensitive surfaces require separate compatibility assessment.
How to use WIKO Super Glue Remover
1. Surface compatibility: test a small amount of the remover on an inconspicuous area before cleaning.
2. Application: apply the liquid to the adhesive residue and distribute it evenly.
3. Dwell time: allow the remover to act for several minutes. Adjust the treatment according to the observed result.
4. Removal: wipe away the loosened adhesive using a soft cloth or a suitable scraper. Repeat the procedure if necessary.
5. Final cleaning: once the adhesive has been removed, clean the treated surface with water and wipe it dry.
Removing adhesive from textiles
Place an absorbent cloth underneath the area being cleaned. Repeat the treatment several times if necessary. Afterwards, thoroughly wash the treated area with lukewarm water. Since textile materials and finishes vary considerably, preliminary compatibility testing is particularly important.
Technical data – WIKO Super Glue Remover 20 ml
| Parameter | Value |
|---|---|
| Manufacturer / brand | GLUETEC / WIKO |
| Product name | Super Glue Remover |
| Article number | SGR.F20 / 103903 |
| Intended use | Removal of cyanoacrylate (CA) adhesives |
| Volume | 20 ml |
| Packaging | Bottle |
| Physical state | Liquid |
| Colour | Colourless to pale yellow |
| Density at 20°C | 1.0 g/cm³ |
| Shelf life stated by the manufacturer | 12 months |
Storage
Store in a cool, dry place in a tightly closed container, away from ignition sources and out of the reach of children. Close the bottle securely after each use.
Safety and application limitations
The remover contains chemical substances requiring appropriate safety precautions. Use in well-ventilated areas, avoid eye contact and wear suitable personal protective equipment in accordance with the safety data sheet. Read the product label and current safety data sheet before use.
Always carry out a compatibility test before applying the remover to plastics, painted surfaces, upholstery or other sensitive materials. The product is not intended for application to skin.
FAQ – frequently asked questions
How can I remove dried super glue from metal or glass?
WIKO Super Glue Remover is developed for removing cyanoacrylate adhesive residues, including those on metal and glass. After several minutes of treatment, loosened adhesive can be wiped off or removed with a suitable scraper.
Can WIKO Super Glue Remover be used on plastics?
The manufacturer identifies plastics as a possible application, but compatibility with every type of plastic is not guaranteed. Always test the remover on an inconspicuous area first.
Can the remover be used on upholstery and fabrics?
Yes, subject to a successful material compatibility test. Place an absorbent cloth underneath the affected area and thoroughly wash the treated section with lukewarm water after removing the adhesive.
How long should the remover remain on the adhesive?
Allow the remover to work for several minutes. The required time depends on the amount and type of adhesive residue. Repeat the process if the initial treatment is insufficient.
Does this product remove other types of adhesives?
The remover is primarily intended for cyanoacrylate adhesives. Its effectiveness on epoxy, polyurethane or silicone-based adhesives has not been confirmed in the referenced technical documentation.
Product safety
Manufacturer
GLUETEC Industrieklebstoffe GmbH & Co. KG
Am Biotop 8a
97259 Greußenheim, Germany
Responsible person in the EU
GLUETEC Industrieklebstoffe GmbH & Co. KG
Am Biotop 8a
97259 Greußenheim, Germany
Reviews
If you've added a review and it doesn't appear on the list, it may be pending moderation.
Leave feedback on the product
