Fischer DuoXpand 10 x 140 FUS frame fixing with hex-head screw for concrete and masonry 1 pc
Product code: 00562170SZT
Leave feedback on the product
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Secure purchase guarantee
Product description
Fischer DuoXpand 10 x 140 FUS – frame fixing for concrete and masonry
Fischer DuoXpand 10 x 140 FUS is a two-component frame fixing designed for push-through installation and multiple fastening of non-structural systems. The 10 × 140 mm version is supplied with a pre-assembled hex-head screw and integrated washer, making it suitable for fastening metal and wooden components to concrete and masonry. The offer includes 1 piece.
Applications
Fischer DuoXpand 10 x 140 FUS can be used for fastening façade, ceiling and roof substructures made of wood or metal, as well as windows, gates, doors, cabinets, wall-mounted kitchen units, beams, TV brackets, wall cladding, brackets and cable ducts or trays.
The manufacturer specifies suitability for substrates including concrete from C12/15, solid brick, solid and perforated sand-lime brick, vertically perforated brick, lightweight concrete blocks and aerated concrete. The fixing can also be used in natural stone with a dense structure and solid gypsum panels in accordance with the manufacturer's documentation.
Key properties
- two-component design with a body made of high-quality nylon,
- special lamella geometry for controlled expansion in the substrate,
- two anchorage depths for the 140 mm version: 50 mm and 70 mm,
- suitable for installation close to edges thanks to gentle expansion behaviour,
- side ribs help prevent the fixing from rotating in the drill hole,
- push-through installation,
- pre-assembled hex-head screw with washer,
- European Technical Assessment ETA-21/0324 for multiple fastening of non-structural systems in concrete and masonry.
Selecting the 10 x 140 FUS version
The anchor length is 140 mm. With an anchorage depth of 50 mm, the maximum usable fixture thickness is 90 mm. With an anchorage depth of 70 mm, the maximum usable fixture thickness is 70 mm. The minimum drill hole depth for push-through installation is 150 mm.
Technical data
| Parameter | Value |
|---|---|
| Manufacturer | Fischer |
| Model | DuoXpand 10 x 140 FUS |
| Manufacturer article no. | 562170 |
| Drill diameter | 10 mm |
| Anchor length | 140 mm |
| Minimum drill hole depth for push-through installation | 150 mm |
| Usable length at 50 mm anchorage depth | 90 mm |
| Usable length at 70 mm anchorage depth | 70 mm |
| Installation type | push-through installation |
| Screw version | hex head with washer |
| Drive | TX40 / SW13 |
| Screw material | electro-galvanised steel |
| Approval | ETA-21/0324 |
| Sales unit | 1 pc |
Storage
No special storage conditions are specified for this version in the available manufacturer data.
FAQ
What drill hole size is required for Fischer DuoXpand 10 x 140 FUS?
The fixing requires a 10 mm diameter drill hole. The minimum drill hole depth for push-through installation is 150 mm.
What fixture thickness can be fastened?
At an anchorage depth of 50 mm, the maximum usable length is 90 mm. At an anchorage depth of 70 mm, it is 70 mm.
Can Fischer DuoXpand 10 x 140 FUS be used in hollow brick?
Yes. The manufacturer specifies vertically perforated brick and other masonry materials covered by the ETA documentation as suitable substrates.
Can it be used in aerated concrete?
Yes. Aerated concrete is listed by the manufacturer among the suitable building materials for the DuoXpand system.
What is the difference between the FUS and T versions?
The FUS version is supplied with a hex-head screw and integrated washer. The T version uses a countersunk-head screw.
Does the fixing have an ETA?
Yes. Fischer DuoXpand has European Technical Assessment ETA-21/0324 for multiple fastening of non-structural systems in concrete and masonry.
How many pieces are included in the offer?
The offer includes 1 Fischer DuoXpand 10 x 140 FUS frame fixing with its corresponding screw.
Reviews
If you've added a review and it doesn't appear on the list, it may be pending moderation.
Leave feedback on the product
Log in with Google
