Fischer FH II 10/25 H single sleeve anchor for concrete with cap nut 1 piece
Product code: 00503140SZT
Leave feedback on the product
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Secure purchase guarantee
Product description
Fischer FH II 10/25 H sold individually – single sleeve anchor for concrete
If you need only one or several fixing points for a repair, replacement or small installation, this offer allows you to purchase 1 Fischer FH II 10/25 H anchor without ordering the complete factory box. It is the same steel heavy-duty sleeve anchor supplied in the original fischer article 503140 pack.
This offer is for 1 anchor taken from the original factory pack of 50 pieces. The individual piece does not have its own manufacturer EAN.
When is a single FH II 10/25 H anchor a practical choice?
Buying individually is useful for service work, repairs, completing an existing installation, fixing a single bracket or carrying out a small project where a full box of 50 anchors would not be required.
For larger installations with multiple fixing points, a separate offer for the complete factory pack of 50 pieces is also available.
What is Fischer FH II 10/25 H designed for?
Fischer FH II-H is a steel heavy-duty sleeve anchor designed for through installation in concrete. The series is used for applications such as railings, brackets, steel structures, ladders, cable trays, machines, gates, façades and grilles.
The FH II 10/25 H variant is suitable for fixtures up to 25 mm thick. Installation requires a 10 mm drill diameter, while the minimum drill-hole depth for through installation is 80 mm.
Why choose the H version?
The letter H identifies the version with a cap nut. This type of finish covers the threaded end and provides a neat appearance where the fixing remains visible after installation.
The anchor has an M6 thread and the nut is operated with a 13 mm wrench.
How does Fischer FH II work?
During tightening, the anchor cone is drawn into the steel expansion sleeve. The sleeve expands against the walls of the drill hole and creates a mechanical anchorage in the concrete.
The black plastic ring helps prevent the anchor from rotating during installation and supports correct tightening of the fixture against the substrate.
Key parameters of the single anchor
- steel heavy-duty sleeve anchor,
- version with cap nut,
- through installation,
- 10 mm drill diameter,
- minimum drill-hole depth 80 mm,
- maximum fixture thickness 25 mm,
- M6 thread,
- 13 mm wrench size,
- sold individually – 1 piece.
Technical data – Fischer FH II 10/25 H
| Parameter | Value |
|---|---|
| Manufacturer | fischer |
| Series | FH II-H |
| Variant | FH II 10/25 H |
| Source manufacturer article | 503140 |
| Melkib sales unit | 1 piece |
| Fixing type | steel heavy-duty sleeve anchor |
| Head type | cap nut |
| Installation method | through installation |
| Drill diameter d0 | 10 mm |
| Minimum drill-hole depth h2 | 80 mm |
| Maximum fixture thickness tfix | 25 mm |
| Thread | M6 |
| Wrench size | 13 mm |
| Substrate covered by technical assessment | cracked and non-cracked concrete C20/25–C50/60 |
| European Technical Assessment | ETA-07/0025 |
Storage
The manufacturer does not specify any special storage conditions or temperature range for this mechanical fixing.
Important when selecting the anchor
In the designation 10/25, 10 refers to the required drill diameter, while 25 mm is the maximum fixture thickness for this variant. The anchor should always be selected according to the substrate, fixture thickness and loads occurring in the specific application.
Current fischer data for article 503140 does not indicate C1/C2 seismic approval, therefore this property is not assigned to the individual FH II 10/25 H anchor.
FAQ – Fischer FH II 10/25 H sold individually
Can I buy only one FH II 10/25 H anchor?
Yes. This offer is specifically intended for purchasing a single anchor without the need to order the complete factory box of 50 pieces.
Is the individual anchor different from the one in the 50-piece box?
No. It is the same FH II 10/25 H variant taken from the original fischer 503140 factory pack. Only the sales unit is different.
Does the individual anchor have its own EAN?
No. The manufacturer GTIN applies to the original 50-piece factory pack and is therefore not assigned to the individual anchor.
What drill diameter is required?
A 10 mm drill bit is required for the FH II 10/25 H variant.
How deep should the drill hole be?
The minimum drill-hole depth for through installation is 80 mm.
What is the maximum fixture thickness?
The maximum fixture thickness for this variant is 25 mm.
Does this variant have C1/C2 seismic approval?
We do not assign C1/C2 seismic approval to this variant because the current fischer data for article 503140 does not indicate such approval.
When should I choose the 50-piece box instead?
The full factory box is more suitable for larger installation projects involving many repeated fixing points.
Reviews
If you've added a review and it doesn't appear on the list, it may be pending moderation.
Leave feedback on the product
Log in with Google
