Flux TK83 50ml with a brush
TK 83 flux
Liquid, medium active flux type 1.1.2/3 A according to ISO 9454-1, alcohol solution of rosin with organic activators, max. soldering temperature 280ºC. Whole parts content 24%. Perfect for manual tinning to restore solderability.
Instructions for use:
Flux can be applied to printed circuit boards by foam, flux wave , immersion and use
brush. The residue does not corrode after welding, so there is no need
to wash. If necessary, remove residues with an alcohol-based PCB cleaner
with ethyl alcohol or isopropyl alcohol.
- machine soldering in professional and consumer electronics,
- whitening of wire ends,
- mixed assembly,
- soldering of passivated surfaces.
Physical and chemical properties:
Density at 20ºC
|Density at 20ºC||
ok. 0.86 +/- 0.02
Store the material in plastic containers (e.g. HDPE, PP or PVC). Keep containers tightly closed in a dry, ventilated place out of the reach of children. Do not store together with oxidizing substances.