GEB Graisse Silicone silicone grease for sanitary fittings and valves 330 g
Product code: GRAISSE 330G
Leave feedback on the product
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Related products
Secure purchase guarantee
Product description
GEB Graisse Silicone 330 g – silicone grease for sanitary fittings and valves
GEB Graisse Silicone 330 g is a hydrophobic silicone grease designed for the maintenance and lubrication of sanitary fittings, taps and valves. The semi-transparent paste is insoluble in water and may also be used on components of installations that come into contact with water intended for human consumption, in accordance with the manufacturer's documentation.
The product is suitable wherever durable lubrication is required for components exposed to water, moisture or elevated temperatures. It also helps limit limescale and mineral deposits on moving parts of sanitary fittings.
Applications of GEB Graisse Silicone
GEB silicone grease is primarily intended for the maintenance and lubrication of sanitary and water installation components. It can be used, among other applications, on taps, valves and other sanitary fittings requiring a lubricant resistant to contact with water.
The product may be used on components of installations in contact with water intended for human consumption, in accordance with the manufacturer's current documentation.
What distinguishes GEB Graisse Silicone
Its hydrophobic properties make the grease suitable for components operating in the presence of water and moisture. The product is insoluble in water, helping it remain on the lubricated surface during use.
GEB Graisse Silicone retains its properties over a wide temperature range from -50°C to +220°C. This makes it suitable for components exposed to both low temperatures and elevated temperatures, within the operating conditions specified by the manufacturer.
The product also helps reduce limescale deposits on sanitary fittings, supporting easier maintenance and reliable operation of moving components.
How to use GEB Graisse Silicone
Before applying the grease, surfaces should be thoroughly cleaned and degreased. The product can be applied directly to the component or spread using a suitable tool such as a spatula.
Use an amount appropriate for the type of component and its operating conditions. Applying excessive quantities does not improve lubrication performance.
Important information before use
GEB Graisse Silicone must not be used in valve or regulator mechanisms in oxygen installations.
The product is not intended for lubricating rapidly moving components. It should also not be applied to surfaces that are subsequently to be painted, stained or bonded. Silicone has anti-adhesive properties and residues left on the surface may reduce the adhesion of paints, adhesives or other coatings.
Technical data of GEB Graisse Silicone 330 g
| Parameter | Value |
|---|---|
| Product type | Silicone grease |
| Appearance | Semi-transparent paste |
| Pack weight | 330 g |
| Density | 1 |
| Operating temperature range | -50°C to +220°C |
| Penetration | 220–250 1/10 mm |
| Penetration after 60 cycles | >230 1/10 mm |
| Base oil viscosity at 25°C | 630 mPa·s |
| Base oil viscosity at 40°C | 420 mPa·s |
| Solubility in water | Insoluble |
| Contact with water intended for human consumption | For applications in accordance with the manufacturer's documentation for drinking water installations |
Storage
Store the product in its original, tightly closed container at a temperature between -5°C and +40°C, in accordance with the manufacturer's recommendations.
FAQ – GEB Graisse Silicone 330 g
Can GEB Graisse Silicone be used in drinking water installations?
Yes. The manufacturer specifies applications for GEB Graisse Silicone on components of installations that come into contact with water intended for human consumption. The product should always be used in accordance with the current manufacturer documentation.
Is GEB silicone grease suitable for taps and valves?
Yes. The grease is designed, among other applications, for maintaining and lubricating taps, valves and other sanitary fittings exposed to water.
What is the operating temperature range of GEB Graisse Silicone?
According to the manufacturer's current technical data, the grease retains its properties from -50°C to +220°C.
Is GEB Graisse Silicone soluble in water?
No. The product is insoluble in water and has hydrophobic properties, making it suitable for components operating in damp environments or in contact with water.
Can silicone grease be applied before bonding or painting?
No. Silicone has anti-adhesive properties and residues on the surface may interfere with subsequent bonding, painting or staining.
Can GEB Graisse Silicone be used in oxygen installations?
No. The manufacturer explicitly states that the product must not be used in valve or regulator mechanisms in oxygen installations.
Is the grease suitable for rapidly moving mechanisms?
No. The manufacturer does not recommend GEB Graisse Silicone for rapidly moving components.
Product safety
Reviews
If you've added a review and it doesn't appear on the list, it may be pending moderation.
Leave feedback on the product
Log in with Google
