MOLYKOTE 55 O-Ring Grease 25 kg, silicone O-ring lubricant, NLGI 2, −65 °C to +175 °C
Product code: 1501838
Leave feedback on the product
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Related products
Secure purchase guarantee
Product description
MOLYKOTE 55 O-Ring Grease 25 kg is a silicone grease for O-rings and seals, designed to operate across a wide temperature range. It promotes positive sealing by slightly swelling elastomers, while offering oxidative stability and reliable friction separation in pneumatic, automotive and general industrial systems.
Benefits and unique features
- Wide service range: −65 °C to +175 °C
- Excellent oxidation resistance and corrosion protection
- Low start-up torque at very low temperatures (−65 °C test)
- Compatible with many plastics and elastomers*
- Both lubricating and sealing action – eases assembly and improves sealing of O-rings
Properties and applications
- Rubber-to-metal interfaces: lubrication in pneumatic systems (aircraft, automotive, general industry).
- O-rings and gaskets: assembly and service of static/dynamic seals; slight swelling enhances sealing.
- Low-temperature mechanisms: very low start-up torque in cold conditions and stable running torque.
- Compatibility note: test before use; not recommended with silicone rubber (SR), polycarbonate (PC) and ABS; not for liquid oxygen or other strong oxidizers.
Technical parameters
| Parameter | Value |
|---|---|
| Net content | 25 kg (industrial pack) |
| Type | silicone O-ring grease |
| Composition (base / thickener) | silicone oil + ester / lithium soap |
| Color | off-white |
| NLGI grade | ~2 |
| Worked penetration (ASTM D217, 60 strokes) | approx. 290 (1/10 mm) |
| Base-oil viscosity (25 °C) | approx. 100 mm²/s |
| Density (20 °C) | approx. 0.98 g/cm³ |
| Service temperature | −65 °C to +175 °C |
| Dropping point (ASTM D566) | approx. 220 °C |
| Low-temp torque at −65 °C | ~0.325 N·m (start); after 20 min ~0.035 N·m |
| Friction coefficient (steel / POM) | μ ≈ 0.03 (6.3 N; 10 mm/s; 24 h) |
| Oxidation resistance | pressure drop after 100 h at 99 °C: ~0.1 bar |
| Oil bleed / evaporation (150 °C, 24 h) | ~3.0 % / ~1.4 % |
| Water washout (ASTM D1264) | approx. 4.2 % |
| Product classification | not classified as hazardous |
| Transport classification | not subject to ADR / IMDG / IATA |
Storage recommendations
Store in the original, tightly closed container in a dry, well-ventilated place, away from oxidizers. Recommended storage temperature: ≤ 40 °C; for full shelf life, store ≤ 32 °C. Shelf life up to 60 months from date of manufacture.
FAQ
1) What is MOLYKOTE 55 O-Ring Grease used for?
Lubricating and sealing O-rings and rubber-to-metal interfaces in pneumatics (aerospace, automotive, industry).
2) What is the service temperature?
Approximately −65 °C to +175 °C.
3) Any materials to avoid?
Silicone rubber (SR), PC and ABS; also avoid use with liquid oxygen and strong oxidizers.
4) Is it hazardous / ADR-regulated?
No – not classified as hazardous and not subject to ADR/IMDG/IATA.
5) Effect on O-rings?
Slightly swells many elastomers to improve sealing; perform compatibility tests first.
Product safety
Manufacturer
UNIVAR Poland Sp. z o.o.
Sławęcińska 14
05-850 Ożarów Mazowiecki, Poland
Responsible person in the EU
UNIVAR Poland Sp. z o.o.
Sławęcińska 14
05-850 Ożarów Mazowiecki, Poland
Reviews
If you've added a review and it doesn't appear on the list, it may be pending moderation.
Leave feedback on the product
Log in with Google
