Isoflex Topas NCA 52 synthetic grease for rolling and sliding bearings, linear guides 370g, 400g, 1kg, 18kg, 25kg, 50kg, 180kg
Product code: 004179
Leave feedback on the product
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Related products
Secure purchase guarantee
Product description
Isoflex Topas NCA 52 is a synthetic grease designed for long-term and reliable lubrication, especially at low temperatures.
Properties:
- Effective in long-term lubrication or lubrication for the entire life of the component.
- Proven and reliable operation, supported by many years of experience.
- Can be used in a variety of applications, even at higher loads.
- Guarantees low starting and operating torques, especially at low temperatures, which translates into high efficiency and energy savings.
- Provides increased durability of structural elements through effective protection against wear.
Application:
- Used in faster rotating rolling and sliding bearings.
- Efficient in heavily loaded small gears, with good tolerance to plastics.
- Recommended for long-term lubrication of linear guides and ball screws in manipulation and automation devices.
- Used in a variety of applications in the automotive industry, for example for lubricating seat rails.
- Ideal for components that are lubricated before the painting and drying process, as the grease remains at the point of friction and continues to lubricate after short-term heat treatment.
- Can be used in plastic/plastic or metal/plastic combinations thanks to good compatibility with various materials.
How to use:
The grease can be applied in various ways: with a spatula, brush or grease gun. When used in automatic lubrication systems, it is recommended to test or agree on transferability.
Parameters:
|
Product technical data |
|
|---|---|
|
Composition, thickener |
soap with calcium complex |
|
Composition, type of oil |
synthetic hydrocarbon oil |
|
Color |
beige |
|
Operating temperature range |
-50°C to 130°C |
|
Density |
ok. 89 g/cm3 |
|
Kinematic viscosity at 100°C |
approx. 5.9 mm2/s |
|
Kinematic viscosity at 40°C |
approx. 31 mm2/.s |
|
Copper corrosion |
Corrosion level 1-120-24 |
| Flow pressure | <1400 mbar |
| Spraying temperature | >220°C |
| Capacity | 370g, 400g, 1kg, 18kg, 25kg, 50kg |
Product safety
Manufacturer
Klüber Lubrication Polska Sp. z o.o.
Pilotów 19
62-006 Kobylnica, Poland
Responsible person in the EU
Klüber Lubrication Polska Sp. z o.o.
Pilotów 19
62-006 Kobylnica, Poland
Reviews
If you've added a review and it doesn't appear on the list, it may be pending moderation.
Leave feedback on the product
Log in with Google
