Korapop 225 310ml grey single-component adhesive and sealant for glass, metal, wood
Product code: 10009608
Leave feedback on the product
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Related products
Secure purchase guarantee
Product description
Korapop 225 310ml
Korapop 225 is a grey, high-quality, single-component adhesive and sealant that does not contain solvents. It is flexible and cures under the influence of moisture from the air, making it ideal for use in body construction, vehicle containers, ventilation and air conditioning technology and metal structures. It is characterized by excellent adhesion to glass, metals, paints, wood-based materials and many other materials.
Application
- Construction of vehicle bodies and containers
- Ventilation and air conditioning technology
- Metal structures
- Adhesion to glass, metals, paints, wood-based materials and hardened materials
Properties
- One-component POP copolymer
- Curing under the influence of moisture from the air
- Flexible and resistant to moisture
- Resistance to atmospheric factors and temperature changes from -40°C to +80°C (short-term up to 120°C)
- Good adhesion to various substrates
Technical parameters
| Parameter | Value |
|---|---|
| Color | gray |
| Density | approx. 1.44 g/cm³ |
| Viscosity | Paste consistency, for application with a spatula or gun |
| Skin formation time | 25 min (DIN 50014 NK 23/50-2) |
| Slope hardening | 3 mm (1 day) |
| Shore-A hardness | 42 |
| Elongation at | 650% |
| Tensile strength | 3.3 N/mm² |
| Further separation strength | 20 N/mm |
| Working temperature | +5°C to +30°C |
Storage and use recommendations
- Store at temperatures below 25°C in a closed container.
- The adhesion and suitability of the adhesive bond with the materials should be checked before use.
- The surfaces should be dry, clean and degreased before applying the adhesive.
- The product can be used on most materials without a primer. For better adhesion on absorbent surfaces such as wood and concrete, it is recommended to use Körabond HG 74.
- Tools should be cleaned immediately after use with Körasolv GL or Körasolv PU. Hardened material can only be removed mechanically.
Safety
The product does not require special labeling according to European Union rules. It is not classified as hazardous in case of fire or harmful to health. The Safety Data Sheet contains additional information on the safe use, storage and disposal of the product.
Product features
- Cartridge type 1k plastikowy 310ml
Product safety
Manufacturer
HB Fuller Europe GmbH
WERNER-VON-SIEMENS-STR. 2
31515 Wunstorf, Germany
Responsible person in the EU
HB Fuller Europe GmbH
WERNER-VON-SIEMENS-STR. 2
31515 Wunstorf, Germany
Reviews
If you've added a review and it doesn't appear on the list, it may be pending moderation.
Leave feedback on the product
Log in with Google
