Loctite AA 330/7388 90ml Multibond set adhesive and activator light yellow acrylic adhesive for metal, wood, ceramics and plastics, high viscosity, universal, food contact approved P1 NSF
Product code: 135288
Leave feedback on the product
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Related products
Select product variant:
Individual variants may differ in price
Secure purchase guarantee
Product description
LOCTITE AA 330/SF 7388 50/40ML
LOCTITE AA 330 is a single-component, universal acrylic adhesive with high viscosity, designed for bonding metals, wood, ferrites, ceramics and plastics. This adhesive requires the use of LOCTITE SF 7388 activator, which initiates the curing process, providing fast and durable connections.
Applications
- Bonding metals, wood, ferrites, ceramics and plastics
- Tool handles
- Appliance components
- Sporting goods and decorative finishes
Properties
- Single-component acrylic adhesive
- High viscosity
- Curing with activator
- Shock and impact resistance
- NSF International - registered for use as a sealant where there is no possibility of food contact
Parameters technical
| Parameter | Value |
|---|---|
| Technology | Acrylic |
| Ingredient | Urethane methacrylate ester |
| Color | Colorless to light yellow |
| Viscosity (Brookfield RVT, 25°C) | 45,000 to 90,000 mPa s |
| Density @ 25°C | 1.05 g/cm³ |
| Flash Point | See MSDS |
| Shear Strength (Steel) | 15 to 30 N/mm² |
| Tensile Strength (Steel) | 12 to 22 N/mm² |
| Thermal Resistance | Temperature Range: -25°C to +25°C |
Instructions use
- Clean and degrease the surfaces to be bonded
- Apply LOCTITE SF 7388 activator to one of the surfaces
- Apply LOCTITE AA 330 adhesive to the other surface
- Join the parts immediately (within 1 minute)
- Excess adhesive can be removed with an organic solvent
- The joint should be immobilized until initial strength is achieved
- Full strength is achieved after 24-72 hours, depending on environmental conditions
Storage and use recommendations
- Store in closed containers in a cool, dry place
- Optimum storage temperature: +8°C to +21°C
- Storage below +8°C or above +28°C may change the product properties
- Do not store near flammable materials
- Avoid contact with eyes and skin, use personal protective equipment
Safety
Before use, read the Safety Data Sheet (MSDS). This sheet contains valuable information on safe use, storage and disposal of the product and procedures in the event of an accident. The product should be used in accordance with the manufacturer's recommendations and occupational health and safety regulations.
Product features
- Maximum Operating Temperature in °C 100
- Color Yellow
- Adhesive type Acrylate
- Setting / skin formation time 3 min.
Product safety
Manufacturer
Henkel Polska Sp. z o.o.
Domaniewska 41
02-672 Warszawa, Poland
Responsible person in the EU
Henkel Polska Sp. z o.o.
Domaniewska 41
02-672 Warszawa, Poland
Reviews
If you've added a review and it doesn't appear on the list, it may be pending moderation.
Leave feedback on the product
Log in with Google
