Loctite AA 330 Multibond 50 ml price for 1 item, sale in packs of 10, light yellow acrylic adhesive for metal, wood, ceramics and plastics, high viscosity, universal, food-safe P1 NSF
Product code: 142572
Leave feedback on the product
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Related products
Secure purchase guarantee
Product description
LOCTITE AA 330
LOCTITE AA 330 is a single-component, high-viscosity acrylic adhesive for universal use. This product is ideal for bonding metals, wood, ferrites, ceramics and plastics. This adhesive requires the use of LOCTITE SF 7388 activator, which initiates the cure process, providing fast, durable bonds.
Applications
- Bonding metals, wood, ferrites, ceramics and plastics
- Tool handles
- Appliance components
- Sporting goods and decorative finishes
Features
- Single-part acrylic adhesive
- High viscosity
- Cures with activator
- Shock and impact resistant
- NSF P1 registered for use as a sealant where there is no possibility of food contact or near processing food
Technical parameters
| Parameter | Value |
|---|---|
| Technology | Acrylic |
| Chemical compound | Urethane methacrylate ester |
| Color | Colorless to light yellow |
| Viscosity (Brookfield RVT, 25°C) | 45,000 to 90,000 mPa s |
| Density @ 25 °C | 1.05 g/cm³ |
| Flash Point | See MSDS |
| Shear Strength (Steel) | 15 to 30 N/mm² |
| Tensile Strength (Steel) | 12 to 22 N/mm² |
| Service Temperature Range | -25°C to 25°C |
Instructions for use
- Clean and degrease the surfaces to be bonded
- Apply LOCTITE SF 7388 activator to one of the surfaces
- Apply LOCTITE AA 330 adhesive to the other surface
- Join the parts immediately (within 1 minute)
- Excess adhesive can be removed with an organic solvent
- The joint should be held in place until initial strength is achieved
- Full strength is achieved after 24-72 hours, depending on environmental conditions
Recommendations for storage and use
- Store in closed containers in a cool, dry place place
- Optimum storage temperature: +8°C to +21°C
- Storage below +8°C or above +28°C may change the product properties
- Do not store near flammable materials
- Avoid contact with eyes and skin, use personal protective equipment
Safety
Before use, read the Safety Data Sheet (MSDS). This sheet contains valuable information on safe use, storage and disposal of the product and procedures in the event of an accident. The product should be used in accordance with the manufacturer's recommendations and occupational health and safety regulations.
Product features
- Maximum Operating Temperature in °C 100
- Color Yellow
- Adhesive type Acrylate
- Setting / skin formation time 3 min.
Product safety
Manufacturer
Henkel Polska Sp. z o.o.
Domaniewska 41
02-672 Warszawa, Poland
Responsible person in the EU
Henkel Polska Sp. z o.o.
Domaniewska 41
02-672 Warszawa, Poland
Reviews
If you've added a review and it doesn't appear on the list, it may be pending moderation.
Leave feedback on the product
Log in with Google
