Loctite Frekote WOLO 5l Separator

Loctite Frekote WOLO 5l is a professional mold release agent designed for fast and effective separation of polyester resins. Thanks to its easy application and high gloss finish, it enables multiple releases without the need for polishing.

Advantages and Unique Features

• Fast curing at room temperature
• Multiple mold releases without buildup
• Easy application – just apply and leave
• High-gloss mold surface finish
• Low VOC content

Properties and Applications

• Technology: low-volatility polymer-based release agent
• Application: polyester resin molding, epoxy molds, fiberglass molds
• New or repaired molds: require prior sealing
• Application method: wipe-on application with no polishing required
• Efficiency: up to several molding cycles without reapplication

Technical Parameters

Instructions for Use

- Thoroughly clean the surface from dust, residues of previous release agents and dry completely.
- Soak a clean, lint-free cloth with WOLO product until damp but not dripping.
- Apply a smooth, moist layer to the mold. For larger surfaces, apply section by section from one end to the other.
- Rub the product for about 10 to 30 seconds and let each layer dry for 5 minutes. Apply a total of 4 coats.
- If the cloth dries during application, discard and use a new one to avoid resin buildup on the mold.
- Wait 15 minutes for the final layer to cure.

Storage Recommendations

Store in a cool, dry place in the original, tightly closed container. Protect from fire, sparks, and temperatures above 28°C. Do not pour unused product back into the original container after use.