Manual dispensing gun for 200 ml 1:1 two-component adhesive cartridges green
Product code: mb-0483
Leave feedback on the product
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Related products
Secure purchase guarantee
Product description
Manual dispensing gun for 200 ml 1:1 two-component adhesive cartridges
The manual dispensing gun for 200 ml 1:1 two-component adhesive cartridges is designed for applying materials supplied in dual cartridges with a 1:1 mixing ratio. The gun mechanism allows both components to be dispensed simultaneously and evenly, helping maintain the proportion determined by the cartridge design.
The metal construction makes the applicator suitable for repetitive assembly, maintenance and production work. Manual operation does not require a compressed-air system or an electrical power supply.
Applications of the 200 ml cartridge gun
The gun is intended for dispensing two-component adhesives and other materials supplied in compatible dual cartridges with a total capacity of 200 ml and a 1:1 component ratio.
It can be used for:
assembly work requiring controlled dispensing of a two-component adhesive,
repair and maintenance work carried out using 2K materials,
series and small-batch production where adhesive is regularly dispensed from 200 ml cartridges,
workshop applications requiring manual and repeatable material application.
What distinguishes the 200 ml 1:1 manual dispensing gun
Simultaneous dispensing of both components helps maintain the ratio resulting from the design of the cartridge.
Metal housing improves the stability of the tool while the material is being dispensed.
Manual mechanism allows the gun to be used without an additional power source or compressed air.
Convenient design makes it easier to guide the applicator and control the amount of dispensed material.
Compatibility with 200 ml 1:1 cartridges allows the gun to be used with appropriately matched two-component adhesive packaging.
When to choose this dispensing gun
This model is a suitable choice when the adhesive is supplied in a dual cartridge with a total capacity of 200 ml and the dispensing ratio is 1:1. Before purchase, check both the cartridge capacity and the arrangement and ratio of its chambers.
What to check before use
The gun is designed for 200 ml cartridges with a 1:1 ratio. The applicator should not be selected solely on the basis of the appearance of the packaging. Cartridges with a different capacity or mixing ratio may require a different gun model.
The gun is responsible for dispensing the components evenly from the cartridge. Proper combination of both adhesive components takes place in a correctly selected mixing nozzle, if such a nozzle is required by the application system.
Technical data of the 200 ml 1:1 manual dispensing gun
| Parameter | Value |
|---|---|
| Product type | Manual dispensing gun |
| Application | Two-component adhesives in dual cartridges |
| Cartridge capacity | 200 ml |
| Dispensing ratio | 1:1 |
| Operation | Manual |
| Housing material | Metal |
| Colour | Green and black |
| User type | Professional user or private end user |
| Hazardous substance content | Does not contain hazardous substances |
Storage
No special storage conditions were specified in the available product information. Store the gun in a place protected against dirt and mechanical damage.
FAQ
Is this gun suitable for 400 ml cartridges?
No. This model is designed for dual cartridges with a total capacity of 200 ml.
Can it be used with 2:1 cartridges?
No. The mechanism of this model is designed for dispensing components in a 1:1 ratio. A cartridge with a 2:1 ratio requires a gun with a corresponding plunger configuration.
Does the gun mix both adhesive components?
The gun dispenses the components simultaneously from both chambers of the cartridge. Proper mixing takes place in a compatible mixing nozzle, if one is required for the adhesive system.
Does the gun require compressed air?
No. It is a manually operated model and therefore does not require a pneumatic connection or an electrical power supply.
Can the gun be used in series production?
Yes. The gun can be used for repetitive assembly and production work, provided that the material is supplied in a compatible 200 ml 1:1 cartridge.
Are the cartridge and mixing nozzle included?
The available information refers to the dispensing gun. The adhesive cartridge and mixing nozzle should be selected according to the packaging system of the material being used.
Product safety
Manufacturer
Melkib Klus Raczek Spółka Komandytowa
ul. Stawowa 91
43-400 Cieszyn, Poland
Responsible person in the EU
Melkib Klus Raczek Spółka Komandytowa
ul. Stawowa 91
43-400 Cieszyn, Poland
Reviews
If you've added a review and it doesn't appear on the list, it may be pending moderation.
Leave feedback on the product
Log in with Google
