Search
Producers
Login
Manual siphon pump 30 L/min for non-aggressive liquids — fast power-free transferring
Description
The 30 L/min siphon pump is a simple, reliable solution for quickly transferring non-aggressive liquids in workshops, garages or warehouses. It operates manually—no power required—using the height difference between containers to deliver a steady, efficient flow.
Benefits and unique features
- Flow up to 30 L/min — fast tank emptying and filling
- No electricity — full mobility anywhere
- Straightforward design — quick start, easy cleaning
- Safe handling of non-aggressive media — lower failure risk
- Lightweight and compact — easy to carry and store
Properties and applications
- Container-to-container transfer: cans, drums, service tanks and IBCs*
- Typical media: water, service fluids, light oils and cleaners**
- Maintenance/MRO: draining, topping up and decanting small to medium volumes
- Operating principle: siphon/gravity — best results with a clear height difference
Technical parameters
| Parameter | Value |
|---|---|
| Type | siphon pump, manual drive |
| Nominal flow | up to 30 L/min (depends on viscosity and head) |
| Use range | non-aggressive liquids** |
| Operating principle | siphon/gravity |
| Power | not required |
| Operating requirement | source container higher than destination |
Storage recommendations
After use, drain the hoses, rinse with water if suitable for the medium, and let dry. Store in a clean, dry place away from heat and UV. Regularly inspect hoses and fittings and replace when worn.
FAQ
1) Can it transfer fuels?
This pump is intended for non-aggressive liquids; before using with fuels, verify material compatibility and local safety/fire regulations.
2) How to reach 30 L/min?
Use short, wide hoses with low-viscosity liquids and maximize the height difference between containers.
3) Does it require power?
No — it operates manually on the siphon principle.
4) Suitable for potable water?
Only if the manufacturer explicitly certifies food-contact compliance.
5) What if flow stops?
Check suction hose immersion and tightness, remove kinks, and increase height difference.
* Ensure hose and fitting diameters are compatible.
** Always verify material compatibility with the medium and operating temperature.
Loctite Henkel Premium Partner
Free delivery from 600 EURO to EU Countries*
+48 509 336 666


