Medmix MCH 13-32T C-System static mixer for 2K adhesives, bell cup connection, 32 elements, 13 mm, 379 mm, 1:1 and 2:1 mix ratios

The Medmix MCH 13-32T is a high-performance C-System static mixer for 2K adhesives. Its C-type bell (cup) connection and 32 mixing elements ensure accurate component blending at 1:1 and 2:1 mix ratios, while the stepped outlet tip allows precise bead shaping during application.

Advantages and unique features

• C-System bell connection – compatible with 2K cartridges featuring a Kelch cup interface.
• Supports two mix ratios, 1:1 and 2:1, with a single mixer design.
• Thirty-two mixing elements provide very homogeneous mixing of components A and B.
• 13 mm outlet diameter and stepped tip make it easy to adjust adhesive bead width.
• Length of approx. 379 mm enables stable material flow, even with higher-viscosity adhesives.
• Single-use static mixer – no cleaning required and reduced risk of adhesive contamination.

Properties and applications

• Accurate 2K adhesive mixing: ensures the correct ratio of components and full mechanical performance of two-component adhesives and sealants.
• Bead application: optimised for linear bead dispensing along edges, grooves, butt and lap joints.
• C-System (cup connection): works with 2K cartridges equipped with the industrial standard bell connection.
• Stepped tip: the outlet can be trimmed to increase flow or adapt bead width to the specific task.
• Typical industries: automotive, machinery, composite manufacturing, metal and panel bonding assemblies.

Technical data

Storage recommendations

Store Medmix MCH 13-32T mixers in their original packaging in a dry, clean environment, away from direct sunlight and heat sources. Protect the nozzles from crushing and from damage to the bell connection. Keep out of the reach of children and use only with compatible 2K cartridges according to the adhesive manufacturer’s instructions.

FAQ

1) Which cartridge systems are compatible with the Medmix MCH 13-32T mixer?
The mixer is designed for two-component cartridges with a C-System (cup) connection operating at 1:1 or 2:1 mix ratios.

2) Is the MCH 13-32T mixer reusable?
No, it is a single-use mixer. Once the adhesive has cured inside the mixing channel, a new nozzle must be installed.

3) Can the adhesive bead width be adjusted?
Yes, the stepped outlet tip can be trimmed to adapt bead width and flow rate to the specific application.

4) What type of applications is this mixer best suited for?
MCH 13-32T is optimised for bead application – linear dispensing of adhesive onto bonding surfaces, for example when assembling panels, profiles and structural components.