Medmix MCQ 08-24T green cup-connection Quadro static mixer for 2K adhesives, C-type interface, 24 elements, 8 mm, 147 mm, 1:1 and 2:1 mix ratios

The Medmix MCQ 08-24T is a green cup-connection Quadro mixer for 2K adhesives with type C interface. This static mixer with 24 mixing elements, an overall length of approx. 147 mm and an 8 mm outlet diameter provides thorough component mixing and a uniform bead at 1:1 and 2:1 mix ratios. It is an excellent choice for dispensing structural adhesives and sealants in cartridge systems with cup connection.

Advantages and unique features

• C-type cup connection – compatible with 2K cartridges featuring a cup interface (Kelchanschluss).
• Supports two mix ratios, 1:1 and 2:1, with a single mixer design.
• Twenty-four mixing elements ensure homogeneous blending of components A and B.
• 8 mm outlet diameter and stepped tip allow adjustment of bead width to the application.
• Compact length of approx. 147 mm offers good handling even in confined areas.
• Single-use static mixer – no cleaning required and reduced risk of adhesive contamination.

Properties and applications

• Accurate 2K adhesive mixing: provides proper reaction and full mechanical performance of two-component adhesives and sealants.
• Bead application: optimised for linear bead dispensing along edges, profiles, panels and structural parts.
• C-type cup connection: works with 2K cartridges designed for cup-connection mixers according to industrial standards.
• Stepped outlet tip: can be trimmed to increase flow or adjust bead width to specific requirements.
• Typical uses: automotive assembly, machinery, composite component production, metal structure bonding and panel installation.

Technical data

Storage recommendations

Store Medmix MCQ 08-24T mixers in their original packaging in a dry, clean environment, away from direct sunlight and heat sources. Protect the nozzles from crushing and damage to the cup interface. Keep out of the reach of children and use only with compatible 2K cartridges according to the adhesive manufacturer’s instructions.

FAQ

1) Which cartridges are compatible with the Medmix MCQ 08-24T mixer?
The mixer is designed for two-component cartridges with a C-type cup connection operating at 1:1 or 2:1 mix ratios.

2) Is the MCQ 08-24T mixer reusable?
No, it is a single-use mixer. Once the adhesive has cured inside the mixing channel, a new nozzle must be installed.

3) What type of application is this mixer best suited for?
MCQ 08-24T is intended for bead application – linear dispensing of adhesive onto bonding surfaces, for example when assembling panels, profiles and structural parts.

4) Can the adhesive bead width be adjusted?
Yes, the stepped outlet tip can be trimmed to adapt the bead width and flow rate to the specific application.