Melkib MS Polymer white 600ml, adhesive and sealing mass, flexible

MELKIB MS POLIMER is a one-component elastic adhesive that hardens by absorbing moisture from the environment. It has universal application and very good adhesion to various materials. It is also used in grouting and sealing seams. The product is distinguished by medium viscosity. Perfect for applications requiring an aesthetic gray flexible connection or sealing

USE

• vehicle construction, industry, craft
• shipbuilding
• fans and air conditioners
• electrical engineering
• metal processing, sheet metal work
• combining plastics
• flexible bonding of moldings and profiles, sheet metal outside and inside

ADVANTAGES

• long-lasting flexibility
• gluing and sealing inside and out
• can be painted and powder coated (temperature resistance from -40°C to +100°C
• very slight mass shrinkage
• does not crack the varnish on the seam surface
• does not gass and does not damage the varnish
• free of hazardous substances, isocyanates, solvents and silicones
• fast curing
• UV, chlorine, mildew, salt water and weather resistant
• very good adhesion to most surfaces without using a primer
• may be disposed of with household waste
• extended shelf life - 18 months

*in unopened packaging, provided that it is stored in a dry, cool and dark warehouse in accordance with the safety data sheet and technical data sheet.

CLEANING

• Clean the material immediately after using the glue - with a dedicated metal or plastic remover. Ask our consultant for product selection
• Wash your hands with soap and water

SURFACE PREPARATION

In case of For clean, degreased and dust-free surfaces, MELKIB MS Polymer perfectly glues such materials as: glass, metal, ceramics, plastics, varnished surfaces and mirrors without using a primer. We recommend that you read the information on surface preparation before using the product - please contact our consultants. Due to the large number of materials and surfaces that can be glued, we recommend performing adhesion tests beforehand

VARNISHING

Melkib MS Polymer can be easily painted with acrylic dispersion varnishes. Adhesion depends on the components of the paint. Before applying paint, clean the adhesive joint with a plastic remover. The varnish shows optimal adhesion to MS Polymer within 3 days of applying the adhesive. In the case of paints based on alkyl resins, the drying time may be longer, we recommend a test.

SAFETY RULES

Avoid skin or food contact until curing is complete. In case of contact with the eyes, rinse them with plenty of water and consult a doctor.

All values and recommendations are based on controlled laboratory tests or field experience and experimentation under normal operating conditions. Melkib-bis s.c. Janusz Klus, Jerzy Klus does not guarantee these data and is not responsible for them. Due to fluctuations in storage time, use of the product, etc. Melkib-bis s.c. Janusz Klus, Jerzy Klus is not responsible for the result of the application. We recommend that you thoroughly test the product before using it.