NAFTOCHEM EMULKOL PS/S semi-synthetic metalworking coolant concentrate drum 180 kg

NAFTOCHEM EMULKOL PS/S semi-synthetic metalworking coolant concentrate drum 180 kg

NAFTOCHEM EMULKOL PS/S is a semi-synthetic coolant concentrate designed for preparing working emulsions used in metal cutting processes and steel sheet profiling. The 180 kg drum variant is intended mainly for plants where coolant works in larger systems, is consumed regularly and must support process continuity without frequent replacement of smaller packs.

The product emulsifies well with water and forms fine-dispersed microemulsions with good cooling performance, high lubricity and long service life during operation. This makes it a practical choice for production environments where stable emulsion performance, predictable process behaviour and easier management of a larger coolant supply matter.

Applications

NAFTOCHEM EMULKOL PS/S is a general-purpose coolant for metal cutting and steel sheet profiling. Emulsions prepared from this concentrate are suitable for processes where the coolant operates for longer periods in circulation and is expected to maintain good biological resistance and stable working performance.

The product is suitable for steel, stainless steel, cast iron, brass, copper and aluminium. This drum version fits especially well into production environments and continuous processes where coolant consumption is higher and supplying larger systems is part of everyday operation.

What makes NAFTOCHEM EMULKOL PS/S 180 kg stand out

The main advantage of this version is the 180 kg drum format, which better matches the needs of larger plants and production lines where coolant is consumed on a regular basis. It helps with stock planning, reduces the frequency of handling smaller packs and fits operations that run on a larger scale.

The coolant itself offers good biological resistance, low foaming tendency, corrosion protection from 3% concentration and good lubricating properties. The refractometer factor of 1.2 also supports daily concentration control in production conditions.

When to choose NAFTOCHEM EMULKOL PS/S 180 kg

This version is worth choosing when coolant works in larger machining systems, during regular production or in profiling processes where uninterrupted operation and convenient management of a larger amount of concentrate are important. It is a good option for plants that do not want to rely only on smaller packs.

NAFTOCHEM EMULKOL PS/S 180 kg is also a practical choice where the emulsion works in large-capacity systems and priorities include working durability, reduced foaming and easier replenishment on a production scale.

How to use NAFTOCHEM EMULKOL PS/S

The product is a concentrate and should be used only after dilution with water. The working concentration should be selected according to the type of operation, machined material and actual process conditions.

Typical working concentrations:

Rough turning: 3–5%

Finish turning: 5–8%

Grinding: 3–5%

Drilling: 5–8%

Tapping: 5–8%

Deep drawing: 8–20%

Profiling: 4–10%

What to consider before use

Before introducing the coolant into the process, the concentration should be matched to the actual operation, material and process load. Too low a concentration may reduce corrosion protection and lubricity, while too high a concentration may be economically unnecessary.

It is also important to remember that some parameters apply to the concentrate, while others apply to a 3% emulsion prepared with water hardness of 15°N. This difference should be taken into account during process monitoring and comparison.

Technical data of NAFTOCHEM EMULKOL PS/S

Storage

Store NAFTOCHEM EMULKOL PS/S in steel or polyethylene containers that protect the product from moisture and mechanical contamination. Storage temperature limits are from -15°C to +40°C, and the storage period should not exceed 1 year. The manufacturer recommends storing the product at temperatures above 0°C.

FAQ

Is NAFTOCHEM EMULKOL PS/S 180 kg a good choice for a larger plant?

Yes. The 180 kg drum is better suited to processes where coolant is used regularly in larger volumes and works in larger machining systems.

Is this version suitable for steel sheet profiling?

Yes. The manufacturer explicitly indicates steel sheet profiling as one of the main applications of EMULKOL PS/S.

Can the product be used in large-capacity systems?

Yes. The TDS states that emulsions prepared from this concentrate perform well in steel profile forming processes where they operate in systems with capacities of several dozen cubic metres.

Is NAFTOCHEM EMULKOL PS/S 180 kg ready to use?

No. It is a coolant concentrate and must be diluted with water before use.

What concentration should be used?

It depends on the operation. Typical concentrations are 3–5% for rough turning and grinding, 5–8% for drilling and tapping, 4–10% for profiling and 8–20% for deep drawing.

When is a smaller variant a better choice than the 180 kg drum?

A smaller variant is more practical when coolant consumption is lower, the working system has a smaller capacity or the product is being introduced on a trial basis.

NAFTOCHEM EMULKOL PS/S 180 kg is a practical drum variant for plants that need a semi-synthetic coolant for larger systems and regular production use.