NAFTOCHEM EMULKOL PS/S semi-synthetic metalworking coolant concentrate 18 kg

NAFTOCHEM EMULKOL PS/S semi-synthetic metalworking coolant concentrate 18 kg

NAFTOCHEM EMULKOL PS/S is a semi-synthetic coolant concentrate designed for preparing working emulsions used in metal cutting and steel sheet profiling processes. It emulsifies well with water and forms fine-dispersed microemulsions with good cooling performance, high lubricity and long service life during operation.

This product is intended for industrial users who need one versatile metalworking fluid for a wide range of everyday machining operations and several material groups. It combines corrosion protection, biological resistance and low foaming tendency with stable in-process performance.

Applications of NAFTOCHEM EMULKOL PS/S

NAFTOCHEM EMULKOL PS/S is a general-purpose coolant for metal cutting operations and for profiling steel sheets. Emulsions prepared from this concentrate are suitable for standard workshop and production environments, as well as for steel profile forming processes where the fluid operates in large-capacity systems.

The product is suitable for machining steel, stainless steel, cast iron, brass, copper and aluminium. According to the manufacturer data, the highest suitability is indicated for steel, stainless steel and cast iron, while it can also be used for selected non-ferrous metals.

What makes NAFTOCHEM EMULKOL PS/S a good choice

One of the key advantages of NAFTOCHEM EMULKOL PS/S is the balance between cooling performance, lubricity and emulsion stability. The product is designed to provide good biological resistance during operation, low tendency to foam and corrosion protection from 3% concentration.

In practice, this means easier fluid maintenance in the system, more stable day-to-day operation and a practical solution for plants that want to use one semi-synthetic coolant in several machining processes. The refractometer factor of 1.2 also helps with concentration control in production conditions.

When to choose NAFTOCHEM EMULKOL PS/S

This coolant is a good choice when you need a semi-synthetic concentrate for different machining operations and a broad range of materials. It is especially useful in plants looking for a stable microemulsion with good cooling and lubricating properties for everyday industrial use.

It is also worth choosing when long emulsion life, reduced foaming and reliable corrosion protection are important in the working system.

How to use NAFTOCHEM EMULKOL PS/S

NAFTOCHEM EMULKOL PS/S is a concentrate and should be used only after dilution with water. The working concentration should be selected according to the type of operation and the actual process conditions.

Typical working concentrations:

Rough turning: 3–5%

Finish turning: 5–8%

Grinding: 3–5%

Drilling: 5–8%

Tapping: 5–8%

Deep drawing: 8–20%

Profiling: 4–10%

What to consider before use

Before introducing the product into the process, the concentration should be matched to the actual operation, material and process load. Too low a concentration may reduce corrosion protection and lubricity, while too high a concentration may be economically unnecessary.

It is also important to note that some parameters apply to the concentrate and some to a 3% emulsion prepared with water hardness of 15°N. This should be taken into account when comparing products or monitoring the process.

Technical data of NAFTOCHEM EMULKOL PS/S

Storage

Store NAFTOCHEM EMULKOL PS/S in steel or polyethylene containers that protect the product from moisture and mechanical contamination. Storage temperature limits are from -15°C to +40°C, and the storage period should not exceed 1 year. The manufacturer recommends storing the product at temperatures above 0°C.

FAQ

Is NAFTOCHEM EMULKOL PS/S suitable for stainless steel?

Yes. Stainless steel is listed by the manufacturer as one of the machined materials, with high suitability for this application.

Can this coolant be used for aluminium?

Yes. The product is also suitable for aluminium, although the highest suitability is indicated for steel, stainless steel and cast iron.

What working concentration should be used?

It depends on the operation. Typical concentrations are 3–5% for rough turning and grinding, 5–8% for drilling and tapping, and 8–20% for deep drawing.

Is NAFTOCHEM EMULKOL PS/S ready to use?

No. It is a concentrate and must be diluted with water before use.

Is this product suitable for steel sheet profiling?

Yes. Steel sheet profiling is one of the applications explicitly indicated by the manufacturer.

What are the main operational benefits of NAFTOCHEM EMULKOL PS/S?

The main benefits are stable microemulsions, good biological resistance, low foaming tendency, corrosion protection and good lubricating properties in everyday industrial use.

NAFTOCHEM EMULKOL PS/S is a practical semi-synthetic coolant concentrate for metalworking plants that need stable emulsions, predictable performance and broad application range.