Pattex chemopren universal classic 300ml strong contact adhesive, for wood, rubber, laminates, leather, foam, felt
Product code: PATTEX 300ML
Leave feedback on the product
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Related products
Select product variant:
Individual variants may differ in price
Secure purchase guarantee
Product description
Usage
For very high-strength contact bonding, e.g. for bonding leather, wood, rubber, textiles, metals, plywood, cardboard and various hard plastics. For gluing insulation materials in places exposed to higher temperatures (e.g. near radiators, cooktops, etc.). Porous or too absorbent materials (hobra, wood) should be coated with Chemoprene Extreme KLASIK at least once with diluted Chemoprene and KLASIK Thinner in a ratio of 2: 1 before gluing. It is not recommended to glue polystyrene, Teflon, softened PVC, PE and PP. It is not recommended for ponds in direct contact with food and drinking water.
Product Benefits
- High initial tack
- Universal use - for rubber, metal, wood, laminates, felt, leather, hard PVC, foams
Technical data
- Chemical basis: Polychloroprene
- Evaporation time / skin time / open time: approx. 15 minutes / not applicable / not applicable
- Adhesive properties: Liquid contact adhesive
- Available containers: 300ml,
Application instruction
Stir the adhesive well before use. Apply thinly on both surfaces with a notched trowel (with teeth F A1), a brush or a short-haired roller. Wait about 15 minutes for the adhesive layer, then put both parts together and press firmly. The compressive strength is decisive for the strength of the joint, not the duration of the pressure. You will reach your final strength in 24 hours.
Storage
Up to 24 months from the production date. Store in the tight original packaging at room temperature. Keep the container tightly closed, even during short work breaks, to prevent evaporation of the solvent. Avoid temperatures below + 5 ° C and above + 50 ° C. It does not require heating the car during transport. Temperature drops down to -10 ° C are allowed, not exceeding three days. If the material has been stored at a temperature below + 5 ° C or has been frozen, the adhesive should slowly adjust to a temperature of about + 20 ° C. This does not in any way affect its operational and technical parameters.
Product safety
Manufacturer
Henkel Polska Sp. z o.o.
Domaniewska 41
02-672 Warszawa, Poland
Responsible person in the EU
Henkel Polska Sp. z o.o.
Domaniewska 41
02-672 Warszawa, Poland
Reviews
If you've added a review and it doesn't appear on the list, it may be pending moderation.
Leave feedback on the product
Log in with Google
