Synthetic food grade calcium sulfonate complex grease ANDEROL FGCS-2 PLUS NLGI 2, NSF H1, Kosher, Halal, heavy duty, 17 kg

ANDEROL FGCS-2 PLUS 17 kg is a universal synthetic food grade grease based on an over-based calcium sulfonate complex (NLGI 2) for heavy duty applications in food processing plants. The grease is NSF H1 registered (incidental food contact) and certified Kosher and Halal. The PLUS variant uses a lower-viscosity PAO base oil, which supports performance at low temperatures and in higher-speed applications, while delivering exceptional load carrying ability, excellent mechanical stability and good resistance to oxidation and corrosion.

Advantages and unique features

• NSF H1 registration + Kosher and Halal certifications – supports food plant compliance and audits.
• Synthetic lower-viscosity PAO base oil – beneficial for low temperatures and higher-speed operation.
• Excellent load carrying ability and wear protection (heavy duty).
• Superior mechanical stability, particularly in the presence of heat and water.
• Formulated to resist separation under centrifugal forces.
• Excellent resistance to water washout and spray-off.
• Excellent rust prevention properties and good oxidation resistance.
• Life performance is typically increased by two to three times compared to a regular mineral oil based grease.

Properties and applications

• Type: NSF H1 food grade calcium sulfonate complex grease, NLGI 2, synthetic PAO base oil.
• Applications: heavy duty food-grade applications in food processing plants, including conditions with water and elevated temperatures.
• Resistance: good oxidation and corrosion resistance; excellent water washout resistance.
• Temperature range: long-term -40°C to +177°C; short-time admissible peak up to +200°C.
• DIN designation: KPHC2K-40.

Technical parameters

Storage recommendations

Store in the closed original container, preferably in protected locations to prevent contamination. If spilled, cover with inert absorbent material and remove, then flush the area with water. Keep away from open flames – the product will burn. Refer to the Safety Data Sheet (SDS) for detailed handling and storage guidance.

FAQ

1) What does NSF H1 mean for ANDEROL FGCS-2 PLUS?
It is a registration for lubricants suitable for applications where incidental food contact may occur.

2) What is different about the PLUS version?
The PLUS version uses a lower-viscosity PAO base oil (approx. 50 mm²/s at 40°C), which can be advantageous for low-temperature and higher-speed applications.

3) What is the operating temperature range?
Long-term -40°C to +177°C, with a short-time admissible peak up to +200°C.

4) Is it resistant to water washout?
Yes – it offers excellent resistance to water washout and spray-off, which is important in food plant sanitation environments.