Synthetic heavy duty food grade calcium sulfonate complex grease ANDEROL FGCS-2 HD NLGI 2, NSF H1, Kosher, Halal, high-viscosity PAO base oil, 0.4 kg
Product code: MB-0423
Leave feedback on the product
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Related products
Secure purchase guarantee
Product description
ANDEROL FGCS-2 HD 0.4 kg is a universal, synthetic heavy duty NSF H1 food grade grease based on an over-based calcium sulfonate complex (NLGI 2). It is designed for high loads, reliable performance in the presence of water and elevated temperatures, and reduced wear. The product is NSF H1 registered (incidental food contact) and certified Kosher and Halal, making it suitable for food processing plants and common audit requirements.
Advantages and unique features
- NSF H1 registration + Kosher and Halal certifications – supports food plant compliance.
- Synthetic PAO base oil with high viscosity (approx. 400 mm²/s at 40°C) – for heavily loaded friction points.
- Superior mechanical stability, particularly in the presence of heat and water.
- Excellent resistance to water washout and spray-off.
- Excellent rust prevention; excellent thermal and oxidation stability.
- Excellent load carrying ability and wear protection; resistant to shock load.
Properties and applications
- Type: NSF H1 food grade synthetic PAO grease; thickener: calcium sulfonate complex; NLGI 2.
- Applications: lubrication of machine components in food processing plants where load capacity, water/corrosion resistance and temperature stability are required.
- Resistance: very good water and corrosion resistance; excellent thermal and oxidation stability.
- Temperature range: long-term -30°C to +175°C; short-time admissible peak up to +200°C.
- Regulatory: food grade lubricants meet FDA 21 CFR 178.3570 requirements.
Technical parameters
| Parameter | Value |
|---|---|
| Color | Tan |
| Thickener | Ca-sulfonate complex |
| Type of base oil | PAO |
| NLGI grade | 2 |
| Operating temperature (long-term) | -30°C to +175°C |
| Short-time admissible temperature peak | +200°C |
| Dropping point | 318°C |
| Base oil viscosity @ 40°C | 400 mm²/s |
| 4-ball test welding load | 4000 N |
| 4-ball wear, mm | 0.50 |
| Water washout, % lost @ 80°C | 0.5 |
| Bearing life performance, hours @ 1000 rpm, 160°C | 260 |
| Mechanical stability, % change @ 10000 strokes | 4.5 |
| Salt fog corrosion, hours | >300 |
| Pack size | 0.4 kg |
Storage recommendations
Store in the closed original container, preferably in protected locations to prevent contamination. If spilled, cover with inert absorbent material and remove, then flush the area with water. Keep away from open flames – the product will burn. Refer to the Safety Data Sheet (SDS) for additional handling and storage guidance.
FAQ
1) What does NSF H1 mean for ANDEROL FGCS-2 HD?
It is a registration for lubricants suitable for applications where incidental food contact may occur.
2) What does “HD” (heavy duty) mean in practice?
The formulation is focused on high load carrying performance, reduced wear, and reliable operation in water/heat and under shock loads.
3) What is the operating temperature range?
Long-term -30°C to +175°C, with a short-time admissible peak up to +200°C.
4) Is it suitable for water and washdown environments?
Yes – it offers excellent resistance to water washout and spray-off, which is important in food plant sanitation conditions.
Product safety
Reviews
If you've added a review and it doesn't appear on the list, it may be pending moderation.
Leave feedback on the product
Log in with Google
