Teroson SB 450 1000 ml transparent one-component agent for cleaning difficult-to-bond surfaces before using elastic adhesives and sealants
Description
Alcohol-based cleaning solution for hard-to-stick surfaces. Contains active ingredients to improve the adhesion of flexible adhesives and sealants to surfaces where good adhesion is usually difficult
TYPICAL PROPERTIES
TEROSON SB 450 is used to clean and, if necessary, improve the adhesion of flexible adhesives and sealants to metals, plastics and coated surfaces.
Instructions for use
A thorough cleaning of the substrate is important to achieve useful adhesion to metals, plastics and coated surfaces.
1. Apply a thin and even coat of TEROSON® SB 450 with a clean cloth or paper.
2. Wipe the damp surface to remove heavy residues. If necessary, repeat the cleaning process.
3. Replace the cloth or paper if it is visibly dirty.
4. Allow the TEROSON® SB 450 to evaporate completely from the parts before joining to avoid trapping solvents in the joint.
5. Immediately after drying, apply Henkel adhesive and reassemble the parts.
6. In order for TEROSON® SB 450 to cover the entire substrate, the product contains a UV dye. It is especially visible in UV with a wavelength of about 380 nm.
7. Tightly close the container after use to prevent moisture ingress. If TEROSON® SB 450 is exposed to water / moisture it loses its activity and becomes cloudy
Optimal storage temperature: 10 to 25 ° C. Storage below 10 ° C or above 25 ° C may irreversibly damage the product.