Teroson VR 620 (Loctite LB 8018 Rostloser) 400 ml penetrating lubricating oil, frees rusty and corroded parts, allows easier disassembly, creates a thin anti-rust coating, for screws, fasteners and metal parts

TEROSON VR 620 400 ml is an industrial “Solvo Rust” aerosol designed to ease disassembly and separation of rusted or seized metal joints. It acts as an anti-adhesive penetrant, and the spray format enables precise application into hard-to-reach areas.

Benefits and unique features

• Aliphatic hydrocarbon base – fast penetration of threads and tight gaps
• High vapour pressure aerosol – convenient, even application
• Versatile for service tasks: MRO, automotive, workshops
• Helps separate stuck joints – reduces the risk of damage during teardown
• Proven physico-chemical parameters for consistent performance

Properties and applications

• Anti-adhesive/penetrant: facilitates loosening of rusted bolts, nuts, pins and hinges
• Service & repairs: rapid action for MRO, vehicle maintenance and general workshops
• Maintenance: aids periodic dismantling of metal parts exposed to corrosion
• Use: shake well, spray onto the joint and allow time to penetrate before attempting to loosen

Technical parameters

Storage recommendations

Pressurised container: protect from sunlight and do not expose to temperatures above 50 °C. Store cool and well-ventilated, away from ignition sources. Do not spray onto open flame; do not pierce or burn, even when empty. Avoid inhalation of aerosol and contact with skin/eyes. Read the current SDS before use.

FAQ

1) Is TEROSON VR 620 flammable?
Yes, it is an extremely flammable aerosol (H222); heating may cause explosion (H229).

2) Typical applications?
Penetrating and separating seized/rusted metal joints in MRO and automotive service.

3) How should it be stored?
Away from ignition sources, cool and ventilated; do not exceed 50 °C and keep out of direct sunlight.

4) Environmental note?
Classified as hazardous to the aquatic environment (H411) – avoid release to the environment.

5) Suitable for plastics?
Primarily intended for metals; test on an inconspicuous area first if used on other materials.