TherMax 16/170 M12 fixing through insulation 1 pc Fischer
Product code: 00051293SZT
Leave feedback on the product
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Secure purchase guarantee
Product description
Fischer TherMax 16/170 M12 – fixing through ETICS insulation
Fischer TherMax 16/170 M12 is a stand-off fixing system designed for installing heavy components through ETICS insulation and other non-load-bearing layers. The system transfers the load to the load-bearing substrate behind the insulation, while the special plastic cone helps reduce thermal bridging.
The version offered on this product page is sold individually – 1 complete fixing. It is intended for customers who do not require the full factory pack containing 20 fixings.
What is included with 1 fixing?
One unit sold in this offer is a complete fixing element taken from the original Fischer TherMax 16/170 M12 factory set.
- 1 × Fischer TherMax 16/170 M12 – anchor rod with insulating cone,
- 1 × 20 × 200 mm mesh sleeve,
- 1 × washer,
- 1 × hexagon nut.
The fixing has an M12 connection thread. The M16 designation refers to the anchoring part of the TherMax system.
Key benefits of Fischer TherMax 16
- installation of heavy components through ETICS insulation,
- helps reduce thermal bridging thanks to the insulating cone,
- transfers high loads to the load-bearing substrate,
- self-cutting cone made of glass-fibre-reinforced plastic,
- allows precise alignment of the attached component,
- suitable for concrete and various masonry materials with an appropriately selected Fischer injection mortar,
- available as a single complete fixing.
Applications
Fischer TherMax 16 is designed for stand-off fixing through external thermal insulation systems. It is particularly suitable where the attached component must be securely anchored in the load-bearing substrate behind the insulation layer.
Typical applications include:
- awnings,
- canopies,
- French balcony railings,
- outdoor air-conditioning units,
- satellite antennas.
Suitable base materials
According to Fischer documentation, the TherMax 16 system can be used – with the appropriate configuration and injection mortar – in cracked and non-cracked concrete, vertically perforated bricks, lightweight concrete hollow blocks, solid and perforated sand-lime bricks, solid bricks and aerated concrete.
Technical data
| Parameter | Value |
|---|---|
| Manufacturer | Fischer |
| System | TherMax 16 |
| Variant | 16/170 M12 gvz |
| Manufacturer article number of the original set | 51293 |
| Connection thread | M12 |
| Fixing type | stand-off installation through ETICS insulation |
| Rod material | galvanised steel |
| Cone material | glass-fibre-reinforced plastic |
| Mesh sleeve | 20 × 200 mm |
| Sales unit | 1 complete fixing |
Do you need the full factory set?
If you require a larger number of fixings together with the Fischer installation accessories, choose the full factory pack available under Melkib SKU 00051293.
The factory Fischer TherMax 16/170 M12 set contains:
- 20 × TherMax M16 fixing elements,
- 20 × 20 × 200 mm mesh sleeves,
- 5 × installation bits,
- 5 × TherMax cutting blades,
- 5 × extension tubes for the injection mortar nozzle,
- 5 × installation instructions.
Melkib SKU for the full set: 00051293.
The additional accessories listed above – installation bit, cutting blade, extension tube and installation instructions – are not included with the single-unit offer 00051293SZT.
How does Fischer TherMax 16 work?
During installation, the glass-fibre-reinforced cone passes through the render and penetrates the insulation layer. The anchor rod is then fixed in the load-bearing substrate using an appropriately selected Fischer injection mortar. The plastic cone provides thermal separation between the attached component and the part of the fixing located inside the wall.
FAQ
How many fixings are included in this offer?
This offer includes 1 complete Fischer TherMax 16/170 M12 fixing with a 20 × 200 mm mesh sleeve, washer and nut.
Are the installation bit and cutting blade included with the single fixing?
No. The installation bit, TherMax cutting blade, extension tube and installation instructions are accessories included with the full factory pack available under SKU 00051293.
Can Fischer TherMax 16 be used for installation through external insulation?
Yes. The system is designed for fixing through ETICS thermal insulation. The final fixing configuration should be selected according to the insulation thickness, base material and required load.
What can be installed with TherMax 16?
Typical applications specified by the manufacturer include awnings, canopies, French balcony railings, air-conditioning units and satellite antennas.
Is injection mortar required for installation?
Yes. TherMax 16 is used with an appropriately selected Fischer injection mortar. The mortar must be selected according to the specific base material and the system documentation.
Where can I buy the full pack of 20 fixings?
The full Fischer TherMax 16/170 M12 factory pack is available from Melkib under SKU 00051293.
Reviews
If you've added a review and it doesn't appear on the list, it may be pending moderation.
Leave feedback on the product
Log in with Google
