WD-40 Specialist Silicone Lubricant 250 ml for Rubber Plastics and Metal
Product code: 03-120
Leave feedback on the product
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Secure purchase guarantee
Product description
WD-40 Specialist Silicone Lubricant 250 ml for rubber plastics and metal
WD-40 Specialist Silicone Lubricant is an aerosol lubricant designed to lubricate and protect components made of rubber, plastics, metal and wood. Its silicone-based formula displaces moisture, reduces friction and helps protect components against corrosion and premature wear.
IMPORTANT — extremely flammable aerosol
The container is pressurised and may burst if heated. Use the product away from heat, sparks and open flames and ensure good ventilation. Do not spray on hot surfaces. Protect from temperatures above 50°C and keep out of reach of children.
What is WD-40 Specialist Silicone Lubricant used for?
The product is particularly suitable for components requiring good slip, protection against moisture and compatibility with rubber and plastics. The manufacturer indicates applications including seals, hydraulic components, guides and door and window mechanisms.
The silicone lubricant creates a layer that helps reduce the adhesion of dust, dirt and oil residues. This helps keep mechanisms cleaner while reducing friction and wear between moving surfaces.
Key properties
- operating temperature range from -35°C to +200°C,
- very good lubricating properties,
- suitable for rubber components,
- can be used on metal, plastics and wood,
- displaces moisture and helps protect against corrosion,
- helps reduce adhesion of dust and dirt,
- suitable for components operating under high pressure,
- Smart Straw system enables wide or precise spray application,
- 360° valve allows application at different angles.
Example applications
- car door and window seals,
- rubber components and hoses,
- garage door guides,
- UPVC door and window latches and mechanisms,
- hydraulic components,
- mechanisms requiring a clean lubricating layer,
- fishing reels.
How to use WD-40 Specialist Silicone Lubricant
Before application, the surface should be as clean as possible and free of loose contamination. Apply a thin, even layer directly to the component. The Smart Straw system allows switching between a wider spray and a precise application in difficult-to-reach areas.
For new or sensitive plastics and surfaces with special compatibility requirements, perform a test in an inconspicuous area before full application.
Technical data
| Parameter | Value |
|---|---|
| Brand | WD-40 Specialist |
| Product | Silicone Lubricant |
| SKU | 03-120 |
| EAN | 5032227507210 |
| Capacity | 250 ml |
| Form | aerosol |
| Base | silicone |
| Operating temperature range | -35°C to +200°C |
| Materials | rubber, plastics, metal, wood |
| Moisture protection | yes |
| Application system | Smart Straw |
| Valve | 360° |
Storage
Store in the original closed container in a cool, well-ventilated place. Protect from sunlight and temperatures above 50°C. Keep away from ignition sources and materials that could increase fire risk.
Safety
WD-40 Specialist Silicone Lubricant is an extremely flammable aerosol. The container is pressurised and may burst if heated. Vapours may cause drowsiness or dizziness. Repeated contact may cause skin dryness or cracking.
Use only outdoors or in a well-ventilated area. Avoid breathing vapours and spray. Do not spray on an open flame or other ignition source. Do not pierce or burn the container, even after use.
FAQ
Is WD-40 Specialist Silicone Lubricant suitable for rubber seals?
Yes. The manufacturer identifies rubber components as one of the main applications, including automotive door and window seals.
Can it be used on plastics?
Yes. Plastics are listed by the manufacturer as suitable materials. For particularly sensitive materials, perform a compatibility test before full application.
What is the operating temperature range?
The manufacturer specifies a range from -35°C to +200°C.
Does it protect against moisture?
Yes. The lubricant displaces moisture and creates a layer that helps protect components against moisture and corrosion.
Does the lubricant attract dust and dirt?
The formula is designed to reduce the adhesion of dust, dirt and oil residues to the protected surface.
Can it be used in mechanisms operating under load?
The manufacturer states that the product performs well on components operating under high pressure. Lubricant selection should always be matched to the requirements of the specific mechanism.
How does the Smart Straw system work?
It allows switching between a wide spray and a precise stream through the attached straw. The 360° valve also enables application at different angles.
Reviews
If you've added a review and it doesn't appear on the list, it may be pending moderation.
Leave feedback on the product
Log in with Google
