WEICON Quadro A static mixing nozzles A-System for 2K adhesives 10 pcs
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Secure purchase guarantee
Opis produktu
WEICON Quadro A – static mixing nozzles for two-component adhesives with A-System connection
WEICON Quadro A static mixing nozzles are designed for dispensing selected two-component WEICON adhesive systems. The nozzles mix resin and hardener directly during dispensing, using an internal mixing geometry developed for uniform and reproducible results.
Quadro A nozzles are intended for compatible 1:1 and 2:1 mixing ratio adhesive systems with an A-System connection. The offered pack contains 10 blue mixing nozzles for industrial assembly, maintenance and adhesive application processes.
Applications of WEICON Quadro A mixing nozzles
These static mixers are suitable for dispensing compatible two-component adhesives where consistent mixing, controlled application and repeatable bonding results are important.
Typical applications
- Dispensing compatible two-component adhesives in metal and plastic assembly operations.
- Maintenance and repair work using selected WEICON epoxy and acrylic adhesives.
- Industrial production processes requiring repeatable component mixing.
- Direct mixing and application without separate manual preparation of resin and hardener.
Which adhesives are compatible with WEICON Quadro A?
According to the manufacturer's compatibility information, Quadro A can be used with selected WEICON products, including:
- WEICON Easy-Mix N 50
- WEICON Easy-Mix N 5000
- WEICON Easy-Mix S 50
- WEICON Easy-Mix RK-7100
- WEICON Easy-Mix RK-7100 Black
- WEICON Easy-Mix PU 90
- WEICON Easy-Mix PU 240
- WEICON Easy-Mix PU Crystal
Important: always verify compatibility with the exact adhesive and cartridge variant. The connection type and mixing ratio must match the manufacturer's requirements. Not every WEICON Easy-Mix product uses the same mixing nozzle.
Key benefits of WEICON Quadro A
Consistent two-component mixing
The internal mixer geometry combines adhesive components as they pass through the nozzle, reducing the need for manual mixing and helping achieve a uniform mixture.
Reproducible adhesive processing
Using a suitable mixing nozzle supports consistent preparation of two-component adhesives. This is particularly valuable in industrial production, assembly operations and quality-controlled bonding processes.
Convenient direct application
Mixing and dispensing take place in one operation. The components do not need to be transferred into a separate container for manual mixing.
How to use WEICON Quadro A mixing nozzles
- Check the adhesive documentation to confirm compatibility with Quadro A.
- Prepare the two-component cartridge according to the adhesive manufacturer's instructions.
- Attach the mixing nozzle securely to the cartridge.
- Start dispensing according to the adhesive instructions. Discard the initial mixed material if required by the manufacturer.
- Apply the adhesive to properly prepared surfaces within the recommended processing conditions.
- Replace the nozzle if adhesive has cured inside the mixing elements.
Important considerations before use
Quadro A is not a universal mixing nozzle for all two-component adhesives. The correct connection system, mixing ratio and adhesive compatibility must be confirmed before use.
Do not substitute Quadro A with Quadro B, Helix or 10:1 mixing nozzles without verifying compatibility. An unsuitable mixer can compromise the adhesive dispensing and mixing process.
Technical specifications – WEICON Quadro A
| Parameter | Value |
|---|---|
| Manufacturer | WEICON |
| Product name | Quadro Mixing Nozzle A |
| Manufacturer part number | 10005236 |
| Product type | Static mixing nozzle |
| Connection system | A-System |
| Mixing ratios | 1:1 / 2:1 for compatible adhesives |
| Colour | Blue |
| Quantity per offered pack | 10 pieces |
| Application | Selected WEICON two-component adhesive systems |
Storage
Store unused mixing nozzles in a clean, dry location. Protect them against contamination and mechanical damage to the mixing elements and connection. Inspect the nozzle for damage or blockage before use.
FAQ – frequently asked questions
Are WEICON Quadro A nozzles compatible with every Easy-Mix adhesive?
No. WEICON uses different mixing systems, including Quadro A, Quadro B and Helix. Compatibility must be checked for the specific adhesive.
Can Quadro A be used for both 1:1 and 2:1 mixing ratios?
Yes. Quadro A is intended for compatible A-System adhesives with 1:1 or 2:1 mixing ratios. Matching the ratio alone does not guarantee cartridge compatibility.
Does the nozzle mix adhesive automatically during dispensing?
Yes. Resin and hardener are mixed inside the static nozzle as the adhesive is dispensed from a compatible cartridge. A suitable dispensing device may be required.
Can the nozzle be reused after adhesive has cured inside?
No. A nozzle containing cured adhesive should be replaced before further application.
How many nozzles are included?
The offered pack contains 10 WEICON Quadro A mixing nozzles. Adhesive cartridges and dispensing devices are not included.
Reviews
If you've added a review and it doesn't appear on the list, it may be pending moderation.

