WIKO aluminium anti-corrosion spray coating up to +500°C 400 ml

WIKO aluminium spray coating for corrosion protection up to +500°C

WIKO aluminium anti-corrosion spray coating 400 ml is designed to protect surfaces exposed to corrosion, elevated temperatures and weathering. Once dry, it forms a smooth, non-porous aluminium-coloured film with a high-gloss finish.

The product combines protective and decorative functions by creating a uniform aluminium appearance while protecting the treated component. Its very high abrasion resistance and temperature resistance up to approximately +500°C make it suitable for conditions in which conventional protective coatings may be insufficient.

Applications of WIKO Aluminium Spray 100090

WIKO Aluminium Spray is intended for producing protective and decorative coatings on surfaces requiring corrosion protection. It is suitable for maintenance, repair, renovation and protection of new components and structures.

Typical applications include machine components, installations, pipelines, housings, technical structures and equipment exposed to heat or weathering. The aluminium finish also helps restore a uniform appearance to repaired or renovated surfaces.

Benefits of WIKO Aluminium Spray

The product forms a fast-drying, smooth and non-porous surface film. The closed structure of the coating supports the protection of the substrate against moisture and corrosive environments, while the high-gloss finish provides an attractive aluminium appearance.

The manufacturer specifies very high abrasion resistance as well as resistance to weathering, acids and alkalis. The applied coating is temperature-resistant up to approximately +500°C.

When to choose WIKO Aluminium Spray

This product is suitable when a surface requires corrosion protection, elevated-temperature resistance and an aluminium finish. It is intended for applications where a durable and abrasion-resistant protective coating is required rather than a purely decorative colour.

WIKO 100090 can be used in industrial maintenance, servicing, workshops, mechanical engineering and the renovation of technical components. The aerosol format makes it easier to cover irregular shapes and areas that are difficult to reach with a brush.

Surface preparation and application

The surface must be clean, dry and free from grease. Remove loose rust, flaking coatings, dust, oil, grease and any other contamination that could reduce adhesion.

Shake the aerosol can thoroughly before use. Apply the coating evenly in thin layers according to the instructions on the product label. When working on an unknown substrate or an existing coating, test the product on a small area before full application.

Important information before use

The resistance up to approximately +500°C applies to the correctly applied and dried coating. It is not the permitted application or storage temperature of the aerosol can. Do not apply the product to hot components or spray it near flames, sparks or other ignition sources.

Resistance to acids and alkalis does not mean compatibility with every chemical regardless of concentration, temperature and exposure time. For a specific process medium, carry out a resistance test under actual operating conditions.

Technical data for WIKO Aluminium Spray 100090

Storage

Store the product upright in its tightly closed original container in a dry and well-ventilated place. Protect it from direct sunlight, heat, flames and other ignition sources. Do not expose the aerosol can to temperatures exceeding +50°C. The shelf life declared by the manufacturer is 12 months.

FAQ

Is WIKO 100090 an aluminium grease?

No. It is a protective spray coating that forms an aluminium-coloured anti-corrosion film after drying. It should not be classified as an anti-seize or assembly grease.

Does the product protect metal against corrosion?

Yes. Its primary function is to provide lasting corrosion protection. The result also depends on correct surface preparation and even application.

Can WIKO Aluminium Spray be used outdoors?

Yes. The manufacturer specifies resistance of the dried coating to weathering. The substrate must be clean and correctly prepared before application.

Does the coating withstand +500°C?

The manufacturer specifies temperature resistance of the dried coating up to approximately +500°C. This value does not apply to application conditions or aerosol-can storage.

Does it create a matt finish?

No. The manufacturer describes the coating as smooth and non-porous with a high-gloss aluminium finish.

Is the coating resistant to abrasion?

Yes. Very high abrasion resistance is one of the main properties declared by the manufacturer.

Can it be applied over an existing coating?

Compatibility depends on the existing coating. Remove poorly bonded layers and test the product on a small area before full application.