WIKO Grease Spray 400 ml for gears and wire ropes -40°C to +150°C

WIKO Grease Spray 400 ml for gears wire ropes and drive mechanisms

WIKO Grease Spray 400 ml is a penetrating aerosol grease designed for gears, racks, open gear systems, wire ropes and drive mechanisms. Its high capillary action helps the product reach narrow gaps and difficult-to-access surfaces, where it forms a strongly adhering lubricating film.

The product reduces friction and component wear, provides long-term resistance to water and protects metal against corrosion. Its operating temperature range from -40°C to +150°C supports use in both low-temperature conditions and mechanisms exposed to elevated temperatures. The lubricating film provides short-term temperature resistance up to +250°C.

Applications

• gears,
• gear racks,
• open gear systems,
• steel wire ropes and cables,
• drive rods,
• guides and moving mechanical connections,
• machine components exposed to water and moisture,
• components requiring grease application in difficult-to-access areas.

Key properties

• high capillary action,
• excellent adhesion of the lubricating film,
• long-term resistance to water,
• protection of metal components against corrosion,
• reduction of friction and component wear,
• operating temperature range from -40°C to +150°C,
• short-term temperature resistance up to +250°C,
• easy application to components with complex shapes,
• helps reduce downtime and the frequency of repairs.

Spray grease for industrial maintenance and machine servicing

WIKO Grease Spray is suitable for industrial maintenance, repair facilities and workshops, particularly where conventional grease is difficult to distribute evenly. The aerosol form facilitates application to gear teeth, racks, guides and surfaces located between the strands of steel wire ropes.

The combination of capillary action, strong adhesion and water resistance helps maintain a lubricating film under demanding operating conditions. Regular use of a correctly selected grease can reduce component wear and the risk of unplanned downtime.

Directions for use

1. Stop the machine and secure it against accidental start-up.
2. Remove loose contamination and residues of the previous lubricant.
3. Shake the aerosol can thoroughly before use.
4. Apply the product evenly to the required surface.
5. Allow sufficient time for the product to penetrate gaps and form a lubricating film.
6. Remove excess product before restarting the machine.

The relubrication interval should be selected according to the load, operating speed, mechanism design and environmental conditions. Before application, confirm that the grease complies with the machine manufacturer's requirements.

Technical data

Storage and safety

Store the product in its original container in accordance with the conditions specified on the label and in the current Safety Data Sheet. Protect it from heat, direct sunlight and ignition sources. Do not pierce or burn the pressurised container, even after use.

The stated temperature values refer to the performance of the formed lubricating film. They do not mean that the aerosol may be sprayed onto hot surfaces. Read the product label and current Safety Data Sheet before use.

FAQ

What is WIKO Grease Spray used for?

It is used for lubricating gears, racks, open gear systems, steel wire ropes and drive mechanisms. It helps reduce friction, wear and corrosion of metal components.

Can WIKO Grease Spray be used at low temperatures?

Yes. The manufacturer specifies a minimum operating temperature of -40°C. Before use, confirm that the product meets all requirements of the particular mechanism.

Is the maximum operating temperature 160°C?

No. Current manufacturer data specifies a continuous operating temperature of up to +150°C. The formed lubricating film provides short-term resistance up to +250°C.

Is WIKO Grease Spray resistant to water?

Yes. The manufacturer declares long-term water resistance, making the product suitable for components exposed to moisture or contact with water.

Can the product be used on steel wire ropes?

Yes. Steel wire ropes are among the applications specified by the manufacturer. Its capillary action helps the lubricant penetrate between the rope strands.

Can the grease be sprayed onto a component heated to 150°C?

No. The temperature range refers to the performance of the formed lubricating film. Do not spray the aerosol onto hot surfaces or near ignition sources.

Is the product suitable for enclosed gearboxes?

The manufacturer primarily specifies gears, racks and open gear systems. Enclosed gearboxes require a lubricant with the viscosity and classification specified by the equipment manufacturer.