Wiko Chain Spray 400 ml lubricates bearings, chains, couplings, protection against corrosion aerozol

WIKO Chain Spray with MoS2 for heavily loaded mechanisms

WIKO Chain Spray with MoS2 400 ml is a synthetic transparent adhesive lubricant designed for the long-term lubrication of internal and external surfaces of heavily loaded chains and steel wire ropes.

The product combines good penetration properties with lasting adhesion to lubricated components. It reaches narrow gaps and difficult-to-access areas of the mechanism, displaces moisture and provides protection against corrosion. Its service temperature range from -35°C to +200°C makes it suitable for many machines, industrial equipment and transport mechanisms.

Applications of WIKO Chain Spray

The product is intended for lubricating various types of chains, joints, couplings and steel wire ropes. It can also be used on gear wheels, worm gears, rolling and ball bearings as well as O-rings.

It is particularly suitable for industrial maintenance, machine servicing and workshops as well as applications where mechanical components are exposed to high loads, moisture, lubricant washout and the risk of corrosion.

Benefits of WIKO Chain Spray with MoS2

The molybdenum disulphide MoS2 additive supports the lubrication of heavily loaded mating surfaces. The adhesive formulation limits rapid lubricant loss, while its very good penetration properties help the product reach between chain links and into narrow areas of the mechanism.

The spray is water-resistant, displaces moisture and provides a preserving effect. It therefore lubricates metal components while also helping to protect them against corrosion.

When to choose this product

WIKO Chain Spray is a suitable choice when a conventional lubricating oil runs off too quickly or is easily washed out of the mechanism. The product is intended for components requiring good lubricant adhesion, penetration into narrow gaps and a wide service temperature range.

The service temperature range must not be confused with the application temperature. Apply the product to cleaned surfaces in accordance with the manufacturer's instructions. Do not operate the mechanism until the volatile components have evaporated.

Directions for use

Remove old lubricant residues and other contamination before application. Shake the aerosol can thoroughly. Spray the surfaces or gaps evenly from a distance of approximately 20 cm.

Allow the product to penetrate the mechanism and evaporate. Repeat the application if necessary. The mechanism may be operated approximately 10 minutes after application and evaporation of the product.

Technical data for WIKO Chain Spray with MoS2 100227

Storage

Store the product in its closed original packaging at a temperature between +5°C and +25°C. Under these conditions the maximum shelf life is 12 months. Higher temperatures may significantly reduce the shelf life. The storage temperature must not fall below +5°C.

FAQ

Is WIKO Chain Spray with MoS2 intended only for chains?

No. The manufacturer also recommends it for steel wire ropes, joints, couplings, gear wheels, worm gears, rolling and ball bearings as well as O-rings.

Does the spray penetrate between chain links?

Yes. The product has very good penetration properties and can reach the internal surfaces and narrow gaps of the mechanism.

Is WIKO Chain Spray water-resistant?

Yes. The product is water-resistant, displaces moisture and helps protect components against corrosion.

What is the service temperature range?

The service temperature range confirmed by the manufacturer is from -35°C to +200°C.

How long should I wait before operating the mechanism?

The manufacturer recommends waiting approximately 10 minutes after application to allow the product to penetrate and evaporate.

Does the chain need to be cleaned before application?

Yes. Old lubricant residues and other contamination should be removed before application. A clean surface helps ensure even distribution and proper adhesion of the lubricant.