WIKO Multifunctional Spray 400 ml for Lubrication and Rust Release

WIKO Multifunctional Spray 400 ml for lubrication rust release and metal maintenance

WIKO Multifunctional Spray 400 ml is a silicone-free, low-viscosity multipurpose oil designed for lubricating, maintaining, releasing rusted connections and protecting various metal components. By combining several functions in one product, it is useful for routine inspections, servicing and rapid industrial maintenance work.

The product helps loosen seized connections such as screws, nuts and bolts. It penetrates narrow gaps, reduces friction between moving components and leaves a protective film that helps prevent corrosion. It can also eliminate squeaking and creaking in hinges, guides and other mechanisms.

Applications

• loosening seized screws, nuts and bolts,
• lubricating hinges, locks, guides and joints,
• maintaining tools and metal machine components,
• protecting metal surfaces against corrosion,
• reducing friction in moving mechanisms,
• eliminating squeaking and creaking,
• maintaining mechanical connections and fasteners,
• servicing vehicles, machinery and workshop equipment,
• routine industrial maintenance,
• workshop and household applications.

Key properties

• combines lubricating, rust-releasing and maintenance functions,
• helps loosen seized connections,
• low viscosity supports penetration into narrow gaps,
• helps protect metal against corrosion,
• reduces friction between moving components,
• eliminates squeaking and creaking,
• designed for various metal components,
• silicone-free formulation,
• aerosol form enables application in difficult-to-reach areas.

Use in industrial maintenance and workshops

WIKO Multifunctional Spray is useful during breakdowns and inspections when a seized connection must be released, a mechanism requires lubrication or a metal component needs temporary corrosion protection. One product can support several common servicing tasks and reduce the number of separate products required at the workplace.

The product leaves an oily film. It must therefore not be used as a degreaser for surface preparation before bonding, painting or sealing. Before such processes, all oil residues must be removed with a suitable cleaning agent.

Directions for use

1. Remove loose dirt from the surface.
2. Shake the aerosol can thoroughly before use.
3. Apply a small amount directly to the required area.
4. For a seized connection, allow the product to penetrate for a short time.
5. If necessary, move the connection mechanically and repeat the application.
6. Remove excess product before operating the equipment.

Before use on painted surfaces, plastics, rubber or other sensitive materials, test compatibility on an inconspicuous area. The product is primarily intended for metal components.

Technical data

Storage and safety

Store upright in the original container in a cool, dry and well-ventilated place. Protect from direct sunlight and temperatures exceeding 50°C. Do not store together with strong acids, strong bases or oxidising agents.

Warning: extremely flammable aerosol. Pressurised container may burst if heated. Do not spray onto an open flame or another ignition source. Avoid breathing the aerosol and use only outdoors or in a well-ventilated area. Read the product label and current Safety Data Sheet before use.

FAQ

What is WIKO Multifunctional Spray used for?

It is used for lubricating, maintaining, releasing rusted connections and protecting metal components. It also helps loosen seized fasteners and eliminate squeaking and creaking.

Can it help loosen seized screws?

Yes. Its low viscosity helps the product penetrate the narrow gap between a screw and nut. Allow it to penetrate briefly before carefully attempting to move the connection.

Does WIKO Multifunctional Spray protect against corrosion?

Yes. Corrosion protection is one of the main properties specified by the manufacturer. The product leaves a protective film on the metal surface.

Does the spray contain silicone?

No. WIKO Multifunctional Spray is a silicone-free multipurpose oil.

Can it be used for degreasing before bonding?

No. The product leaves an oily film that may reduce the adhesion of adhesives, sealants and coatings. Use a suitable degreasing agent before bonding.

Can it be applied to plastics and rubber?

The product is primarily intended for metal components. Test compatibility on an inconspicuous area before applying it to plastics, rubber or painted surfaces.