Zubora 10 H Extra FF semi-synthetic universal metalworking coolant 200l based on mineral oil with EP, AW additives, stable, corrosion protection

ZUBORA 10 H EXTRA FF can be used in the following applications:

• Dragging
• Tapping
• reaping holes,
• drilling deep holes,
• Truncating
• front and envelope milling,
• Turning
• Drilling
• cut.

Very good corrosion protection of details and machine elements as well as good washing properties make
ZUBORA 10 H EXTRA FF will work well when machining most materials such as:
• low / medium alloy steels
• high-alloy steels
• stainless steel
• grey cast iron
• aluminium

COOLANT PROPERTIES

• semi-synthetic, water-miscible highly efficient coolant
• based on mineral oil
• with a high content of AW and EP polar additives
• long stable
• better machine cleanliness
• REACH compliant
• formaldehyde-free
• Reacts to plastics, paints and coatings according to VDI 3035
• available packages: 20l, 60l and 200l

ZUBORA 10 H EXTRA FF contains inhibitors that block the formation of nitrosamines, i.e. if secondary amines and nitrites appear (e.g. as a result of precipitation of foreign compounds), stable, carcinogenic N-nitrosamines will not be able to form. Exceeding the limit values of nitrite according to TRGS 611 does not require partial or complete replacement of the emulsion.

TECHNICAL DATA

USE

Thanks to the use of highly effective EP/AW additives, Zubora 10 H Extra FF has a wide range of applications. The use of these additives significantly extends the life of the tool and allows you to work at high cutting speeds. Therefore, machining processes can be more optimized. Thus, high process security can be guaranteed even for very difficult work operations. This advantage also guarantees high flexibility for various cutting processes, both in central systems as well as those working in individual systems.

Recommended hardness of water used: 12 to 24 °dH

OPERATING CONCENTRATION

drilling / milling about 5 %
reaping / cutting about 10%

STORAGE

Recommended storage temperature: from +5°C to max. +40°C.

ADDITIONAL INFORMATION

The product works perfectly with deemulsifying oils for Divinol T guides.

If you need to increase corrosion protection, we recommend Zeller & Gmelin anti-corrosion agents.

If you have any questions, please do not contact us.

This information corresponds to the state of our current knowledge. They do not exempt users from self-checks. From our information, it is not possible to derive a legally binding assurance of certain characteristics or suitability for use for a specific purpose. The recipients of our products should comply with any applicable laws and regulations that apply to the use and handling of our products on their own.