fischer DuoXpand 10 x 160 T frame fixing with countersunk-head screw for concrete and masonry 1 pc
Product code: 00562159SZT
Leave feedback on the product
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Secure purchase guarantee
Product description
fischer DuoXpand 10 x 160 T – long frame fixing for timber, concrete and masonry
When a standard frame fixing is too short for a thick timber, beam or substructure, the 160 mm DuoXpand version provides additional usable length. fischer DuoXpand 10 x 160 T is a two-component frame fixing for push-through installation and is particularly suitable for fastening wooden components to concrete and masonry.
The T version is supplied with a pre-assembled countersunk-head screw with TX40 drive. The countersunk head can be seated neatly in the surface of the fixture, making this version particularly suitable for timber applications.
This offer is for 1 piece of fischer DuoXpand 10 x 160 T frame fixing with the matching pre-assembled screw.
What makes the 10 x 160 T version different?
The key feature of this 160 mm version is the choice of three anchorage depths. This allows the fixing configuration to be selected according to the thickness of the fixture and the substrate conditions.
- at 50 mm anchorage depth, the usable length is up to 110 mm,
- at 70 mm anchorage depth, the usable length is up to 90 mm,
- at 140 mm anchorage depth, the usable length is up to 20 mm.
This makes DuoXpand 10 x 160 T suitable both for thicker fixtures with a shallower anchorage depth and for applications requiring significantly deeper anchorage in the building material.
For beams, timber and substructures
fischer DuoXpand 10 x 160 T is particularly useful where the component being fastened is relatively thick. Typical applications include:
- timber and wooden beams,
- wooden façade substructures,
- roof and ceiling substructures,
- window and door frames,
- construction and fit-out components,
- cabinets and wall-mounted kitchen units,
- wall cladding,
- brackets and other components installed using push-through fixing.
How does DuoXpand work in different substrates?
The two-component design combines a grey body made of high-quality nylon with a more flexible red component in the expansion zone. The special lamella geometry adapts the expansion behaviour to the building material.
In solid materials, the load is distributed evenly into the substrate. In hollow masonry, the lamellae expand against the internal walls and form an interlocking connection in the cavity. The design provides controlled expansion and helps reduce damage to porous building materials.
Suitable building materials
fischer DuoXpand is designed for multiple fastening of non-structural systems in concrete and masonry. Suitable substrates specified by the manufacturer include:
- concrete from C12/15,
- solid brick,
- solid sand-lime brick,
- solid blocks made of lightweight and normal-weight concrete,
- vertically perforated brick,
- perforated sand-lime brick,
- hollow blocks made of lightweight concrete,
- aerated concrete.
According to the manufacturer's documentation, the fixing can also be used in natural stone with a dense structure and solid gypsum panels.
Countersunk head – why choose the T version?
The T version uses a screw with a countersunk head. This is particularly practical for wooden components because the screw head can be seated in the surface of the material. The screw uses a TX40 drive.
Technical data
| Parameter | Value |
|---|---|
| Manufacturer | fischer |
| Series | DuoXpand |
| Version | 10 x 160 T |
| Manufacturer article no. | 562159 |
| Drill diameter | 10 mm |
| Anchor length | 160 mm |
| Minimum drill hole depth for push-through installation | 170 mm |
| Usable length at 50 mm anchorage depth | 110 mm |
| Usable length at 70 mm anchorage depth | 90 mm |
| Usable length at 140 mm anchorage depth | 20 mm |
| Installation type | push-through installation |
| Screw version | countersunk head |
| Drive | TX40 |
| Screw material | electro-galvanised steel |
| European Technical Assessment | ETA-21/0324 |
| Melkib sales unit | 1 pc |
How to select the anchorage depth?
For a thick fixture where a 50 mm anchorage depth is suitable, the 160 mm version provides up to 110 mm of usable length. At 70 mm anchorage depth, the usable length is up to 90 mm. A 140 mm anchorage depth is also available, leaving up to 20 mm of usable length.
FAQ
How thick a beam or timber can be fastened with DuoXpand 10 x 160 T?
At a 50 mm anchorage depth, the usable length is up to 110 mm. At a 70 mm anchorage depth, it is up to 90 mm. The final installation configuration should be selected according to the substrate and the requirements of the fastening.
What drill diameter is required?
A 10 mm drill is required. The minimum drill hole depth for push-through installation is 170 mm.
Is DuoXpand 10 x 160 T suitable for timber?
Yes. The manufacturer particularly recommends the DuoXpand version with countersunk-head screw for fastening timber to concrete or masonry.
Can it be used in hollow masonry?
Yes. The DuoXpand system is suitable for appropriate vertically perforated bricks, hollow blocks and other masonry substrates specified in the manufacturer's documentation.
Can it be used in aerated concrete?
Yes. Aerated concrete is among the building materials specified by the manufacturer for the DuoXpand system.
What screw head does the T version have?
The T version is supplied with a pre-assembled countersunk-head screw with TX40 drive.
Is the screw included?
Yes. The fixing is supplied with a matching pre-assembled screw.
How many pieces are included in this offer?
This offer is for 1 piece of fischer DuoXpand 10 x 160 T with screw.
Reviews
If you've added a review and it doesn't appear on the list, it may be pending moderation.
Leave feedback on the product
Log in with Google
