Fischer DuoXpand 10 x 120 T frame fixing with countersunk head screw for concrete and masonry 1 pc
Product code: 00562157SZT
Leave feedback on the product
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Secure purchase guarantee
Product description
Fischer DuoXpand 10 x 120 T – frame fixing with countersunk head screw
Fischer DuoXpand 10 x 120 T is a two-component frame fixing designed for push-through installation and multiple fastening of non-structural systems in concrete and masonry. The 10 × 120 mm version is supplied with a pre-assembled screw with a countersunk head and TX40 drive.
The offer includes 1 piece of Fischer DuoXpand 10 x 120 T frame fixing with the matching screw.
120 mm version – for fixtures up to 70 mm thick
The 10 x 120 T version offers two anchorage depths. At an anchorage depth of 50 mm, the maximum usable length is 70 mm. At an anchorage depth of 70 mm, the usable length is 50 mm. This allows the installation method to be adapted to the substrate and the thickness of the fixture.
The minimum drill hole depth for push-through installation is 130 mm, and the required drill diameter is 10 mm.
Key properties
- two-component design with a body made of high-quality nylon,
- special lamella geometry for controlled expansion in the substrate,
- two anchorage depths: 50 mm and 70 mm,
- push-through installation,
- side ribs help prevent the fixing from rotating in the drill hole,
- gentle expansion behaviour allows installation close to edges,
- pre-assembled screw with countersunk head,
- TX40 drive,
- version particularly suitable for fastening wooden components,
- European Technical Assessment for multiple fastening of non-structural systems.
Applications
Fischer DuoXpand 10 x 120 T can be used, among other applications, for fastening wooden façade, ceiling and roof substructures, as well as windows, doors, gates, cabinets, wall-mounted units, beams, squared timber, brackets, supports and finishing elements.
Building materials
The manufacturer specifies the DuoXpand system for use in substrates including:
- concrete from C12/15,
- solid brick,
- solid sand-lime brick,
- perforated sand-lime brick,
- vertically perforated brick,
- lightweight concrete blocks,
- aerated concrete.
According to the manufacturer's documentation, the fixing can also be used in suitable natural stone with a dense structure and solid gypsum panels.
Technical data
| Parameter | Value |
|---|---|
| Manufacturer | Fischer |
| Series | DuoXpand |
| Version | 10 x 120 T |
| Manufacturer article no. | 562157 |
| Drill diameter | 10 mm |
| Fixing length | 120 mm |
| Minimum drill hole depth for push-through installation | 130 mm |
| Usable length at 50 mm anchorage depth | 70 mm |
| Usable length at 70 mm anchorage depth | 50 mm |
| Installation type | push-through installation |
| Screw version | countersunk head |
| Drive | TX40 |
| Screw material | electro-galvanised steel |
| Sales unit | 1 pc |
FAQ
What drill hole is required for Fischer DuoXpand 10 x 120 T?
Use a 10 mm drill bit. The minimum drill hole depth for push-through installation is 130 mm.
What fixture thickness can be fastened?
At an anchorage depth of 50 mm, the usable length is up to 70 mm. At an anchorage depth of 70 mm, it is up to 50 mm.
What type of screw head is used in the T version?
The T version is supplied with a screw with a countersunk head and TX40 drive.
Can the fixing be used in aerated concrete?
Yes. Aerated concrete is one of the building materials specified by the manufacturer for the DuoXpand system.
Is the screw included?
Yes. Fischer DuoXpand 10 x 120 T is supplied with a matching pre-assembled screw.
How many pieces are included in the offer?
The offer includes 1 Fischer DuoXpand 10 x 120 T frame fixing with the corresponding screw.
Reviews
If you've added a review and it doesn't appear on the list, it may be pending moderation.
Leave feedback on the product
Log in with Google
