Fischer DuoXpand 10 x 120 FUS frame fixing with hex-head screw and washer for concrete and masonry 1 pc
Product code: 00562169SZT
Leave feedback on the product
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Secure purchase guarantee
Product description
Fischer DuoXpand 10 x 120 FUS – frame fixing for fastening metal to concrete and masonry
Need to fasten a profile, bracket, support or another metal component to concrete or masonry? Fischer DuoXpand 10 x 120 FUS is designed with exactly these applications in mind. The FUS version uses a pre-assembled screw with a hex head and formed washer, providing a broad clamping surface and making installation with a wrench particularly convenient.
The fixing has a diameter of 10 mm and a length of 120 mm. The two-component DuoXpand design adapts its expansion behaviour to the building material, allowing the same fixing to be used in concrete as well as in different types of masonry.
The offer includes 1 piece of Fischer DuoXpand 10 x 120 FUS frame fixing with the matching pre-assembled screw.
Why is the FUS version well suited to metal components?
The key difference compared with the T version is the screw head. DuoXpand FUS uses a hex head with washer. This makes it particularly practical for fastening profiles, angle brackets, supports, holders, rails and other components where a larger clamping surface is useful.
The screw can be driven using TX40 or SW13, giving flexibility in tool selection depending on the installation space.
What can Fischer DuoXpand 10 x 120 FUS be used for?
The 10 x 120 FUS version is intended for push-through installation. Typical applications include:
- metal profiles and substructures,
- brackets and supports,
- façade, ceiling and roof substructures,
- window and door frames,
- gates and fitted structures,
- mounting brackets and supports,
- cable ducts and cable trays,
- wooden components requiring fastening with a hex-head screw.
Two anchorage depths – easier adaptation to the substrate
Fischer DuoXpand 10 x 120 FUS can be installed using two anchorage depths. At an anchorage depth of 50 mm, the usable length is up to 70 mm. At an anchorage depth of 70 mm, the usable length is up to 50 mm.
This allows the same fixing to be matched to different fixture thicknesses and substrate conditions without changing the drilling diameter. A 10 mm drill bit is required in both cases.
How does DuoXpand work in masonry and porous materials?
The grey body made of high-quality nylon provides strength, while the red component increases the flexibility of the expansion zone. The special lamella geometry enables controlled and gentle expansion in the building material. This is particularly useful in porous substrates and helps reduce stress on the material near edges.
Side ribs help prevent the fixing from rotating in the drill hole while the screw is tightened.
Building materials
The Fischer DuoXpand system is designed for fastening in concrete and different types of masonry. The manufacturer specifies applications including:
- concrete from C12/15,
- solid brick,
- perforated brick and hollow masonry units,
- solid and perforated sand-lime masonry units,
- lightweight concrete blocks,
- aerated concrete,
- natural stone with a dense structure,
- solid gypsum panels.
Technical data – Fischer DuoXpand 10 x 120 FUS
| Parameter | Value |
|---|---|
| Manufacturer | Fischer |
| Series | DuoXpand |
| Version | 10 x 120 FUS |
| Manufacturer article no. | 562169 |
| Drill diameter | 10 mm |
| Fixing length | 120 mm |
| Minimum drill hole depth for push-through installation | 130 mm |
| Usable length at 50 mm anchorage depth | 70 mm |
| Usable length at 70 mm anchorage depth | 50 mm |
| Installation type | push-through installation |
| Screw version | hex head with washer |
| Drive | TX40 / SW13 |
| Screw material | electro-galvanised steel |
| European Technical Assessment | ETA-21/0324 |
| Sales unit | 1 pc |
FUS or T – which DuoXpand version should you choose?
If you are fastening a profile, bracket or another metal component, the FUS version with a hex-head screw and washer is a practical choice. If a flush screw head is required, for example in a wooden component, the DuoXpand T version with a countersunk head screw may be more suitable.
FAQ
Is Fischer DuoXpand 10 x 120 FUS suitable for fastening metal profiles?
Yes. The FUS version is particularly suitable for fastening metal components to concrete and masonry. The screw uses a hex head with washer, providing a broad clamping surface on the fixture.
What drill bit is required?
A 10 mm drill bit is required. The minimum drill hole depth for push-through installation is 130 mm.
What fixture thickness can be fastened?
At a 50 mm anchorage depth, the usable length is up to 70 mm. At a 70 mm anchorage depth, the usable length is up to 50 mm.
Can DuoXpand 10 x 120 FUS be used in hollow masonry?
Yes. The DuoXpand system is intended for use in suitable hollow and masonry materials in accordance with the manufacturer's documentation.
Can it be used in aerated concrete?
Yes. Aerated concrete is among the substrates specified by the manufacturer for the DuoXpand system.
How is the screw driven?
The 10 x 120 FUS version uses a TX40 / SW13 drive, so the screw can be installed using the corresponding bit or wrench.
Is the screw included?
Yes. The fixing is supplied with the matching pre-assembled hex-head screw with washer.
How many pieces are included in the offer?
This offer includes 1 Fischer DuoXpand 10 x 120 FUS frame fixing with screw.
Reviews
If you've added a review and it doesn't appear on the list, it may be pending moderation.
Leave feedback on the product
Log in with Google
