Fischer DuoXpand 10x180 FUS frame fixing with hex-head screw 1 pc
Product code: 00562172SZT
Leave feedback on the product
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Secure purchase guarantee
Product description
Fischer DuoXpand 10x180 FUS – frame fixing with hex-head screw 1 pc
Fischer DuoXpand 10x180 FUS is a two-component frame fixing with a diameter of 10 mm and a length of 180 mm, supplied with a pre-assembled zinc-plated screw with hexagonal head and integrated washer. The DuoXpand design adapts its expansion behaviour to the substrate and is intended for push-through installation.
The offer includes 1 complete DuoXpand 10x180 FUS fixing with screw.
Applications of Fischer DuoXpand 10x180 FUS
The FUS version with hexagonal head and wide integrated washer is particularly suitable for fixing metal components to concrete and masonry. The DuoXpand system can be used, among other applications, for fixing:
- façade, ceiling and roof substructures,
- windows, gates and doors,
- cabinets and wall-mounted kitchen units,
- beams and structural elements,
- TV brackets and supports,
- wall cladding,
- brackets and metal structures,
- cable ducts and cable trays.
Which substrates is DuoXpand suitable for?
According to the manufacturer's documentation, the system has a technical assessment for use in substrates including concrete of at least class C12/15, solid brick, solid and perforated sand-lime brick, lightweight and normal-weight concrete blocks, hollow blocks and aerated concrete. The manufacturer also indicates use in natural stone with a dense structure and solid gypsum panels.
Key properties
- two-component DuoXpand fixing design,
- 10 mm drill hole diameter,
- 180 mm fixing length,
- push-through installation,
- hex-head screw with integrated washer,
- zinc-plated steel screw,
- TX40 / SW13 drive,
- several possible anchoring depths,
- European Technical Assessment ETA for the DuoXpand system.
Technical data
| Parameter | Value |
|---|---|
| Manufacturer | Fischer |
| System | DuoXpand |
| Variant | 10x180 FUS |
| Drill hole diameter d0 | 10 mm |
| Fixing length l | 180 mm |
| Minimum drill hole depth for push-through installation h2 | 190 mm |
| Usable length at 50 mm anchoring depth | 130 mm |
| Usable length at 70 mm anchoring depth | 110 mm |
| Usable length at 140 mm anchoring depth | 40 mm |
| Usable length at 160 mm anchoring depth | 20 mm |
| Drive | TX40 / SW13 |
| Screw version | hexagonal head with integrated washer |
| Sales unit | 1 pc |
Storage
No specific storage conditions for this variant are stated in the manufacturer's documentation used for this product description.
Installation
DuoXpand is designed for push-through installation. In solid building materials, the fixing distributes the load evenly into the substrate. In hollow materials, the expansion elements engage with the walls of the cavities and adapt to the internal structure. The installation parameters and conditions specified in the manufacturer's technical documentation and European Technical Assessment must be observed.
FAQ
Does the offer include a full box of 50 pieces?
No. This product is sold individually. The offer includes 1 Fischer DuoXpand 10x180 FUS fixing with the pre-assembled screw.
What drill diameter should be used?
For DuoXpand 10x180 FUS, the manufacturer specifies a 10 mm drill hole diameter.
What is the minimum drill hole depth?
For push-through installation, the minimum drill hole depth is 190 mm.
Is the fixing suitable for concrete?
Yes. The system is technically assessed for use in substrates including concrete from class C12/15.
Can it be used in hollow blocks and other masonry materials?
Yes. DuoXpand is also intended for various masonry materials, including hollow substrates. The exact application must be selected in accordance with Fischer technical documentation.
What is the FUS version intended for?
The FUS version uses a screw with a hexagonal head and integrated washer. The manufacturer particularly recommends this version for fixing metal components to concrete and masonry.
Reviews
If you've added a review and it doesn't appear on the list, it may be pending moderation.
Leave feedback on the product
Log in with Google
