Fischer DuoXpand 10x230 FUS frame fixing with hex-head screw 1 pc
Product code: 00562174SZT
Leave feedback on the product
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Secure purchase guarantee
Product description
Fischer DuoXpand 10x230 FUS – frame fixing with hex-head screw 1 pc
Fischer DuoXpand 10x230 FUS is a two-component frame fixing with a diameter of 10 mm and a length of 230 mm, supplied with a pre-assembled zinc-plated screw with hexagonal head and integrated washer. The DuoXpand design allows the expansion behaviour to adapt to the substrate and is intended for push-through installation.
The offer includes 1 complete Fischer DuoXpand 10x230 FUS fixing with screw.
Applications of Fischer DuoXpand 10x230 FUS
The FUS version with a hex-head screw and integrated washer is particularly suitable for fixing metal components. The DuoXpand system can be used, among other applications, for fixing:
- façade, ceiling and roof substructures,
- windows, gates and doors,
- cabinets and wall-mounted units,
- beams and structural elements,
- brackets and supports,
- wall cladding,
- metal brackets and structures,
- cable ducts and cable trays.
Key properties
- two-component DuoXpand design,
- 10 mm drill hole diameter,
- 230 mm fixing length,
- push-through installation,
- hex-head screw with integrated washer,
- zinc-plated steel screw,
- TX40 / SW13 drive,
- several possible anchoring depths,
- European Technical Assessment ETA for the DuoXpand system.
Technical data
| Parameter | Value |
|---|---|
| Manufacturer | Fischer |
| System | DuoXpand |
| Variant | 10x230 FUS |
| Drill hole diameter d0 | 10 mm |
| Fixing length l | 230 mm |
| Minimum drill hole depth for push-through installation h2 | 240 mm |
| Usable length at 50 mm anchoring depth | 180 mm |
| Usable length at 70 mm anchoring depth | 160 mm |
| Usable length at 140 mm anchoring depth | 90 mm |
| Usable length at 160 mm anchoring depth | 70 mm |
| Drive | TX40 / SW13 |
| Screw version | hexagonal head with integrated washer |
| Sales unit | 1 pc |
Storage
No specific storage conditions for this variant are stated in the manufacturer's technical documentation used for this description.
Installation and substrate selection
DuoXpand is intended for push-through installation. Its special expansion geometry allows the fixing to work in both solid and hollow building materials. In solid materials, the design helps distribute the load evenly into the substrate, while in hollow materials the expansion elements adapt to the internal structure. The anchoring depth and installation parameters must be selected in accordance with Fischer technical documentation and the European Technical Assessment.
FAQ
Does the offer include a box of 50 pieces?
No. This sales variant includes 1 Fischer DuoXpand 10x230 FUS fixing with the pre-assembled screw.
What drill diameter should be used?
For DuoXpand 10x230 FUS, the manufacturer specifies a 10 mm drill hole diameter.
What is the minimum drill hole depth?
For push-through installation, the minimum drill hole depth is 240 mm.
What usable lengths are available?
Depending on the anchoring depth, the usable lengths are 180 mm, 160 mm, 90 mm or 70 mm.
Is the fixing suitable for concrete and masonry?
Yes. The DuoXpand system is intended for applications in concrete and various masonry materials within the scope specified in the manufacturer's ETA.
What is the FUS version particularly intended for?
The FUS version with a hex-head screw and integrated washer is particularly suitable for fixing metal structures and components.
Reviews
If you've added a review and it doesn't appear on the list, it may be pending moderation.
Leave feedback on the product
Log in with Google
