Hylomar H engineering grade liquid gasket 300ml
Product code: HYLOMAR H 300ML
Leave feedback on the product
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Related products
Select product variant:
Individual variants may differ in price
Secure purchase guarantee
Product description
HYLOMAR® H 80 ml -high-temperature, flexible sealant, the so-called engineering grade liquid sealant for metal and plastic surfaces. Contrary to other compounds and silicones, after opening it does not dry out and it does not solidify in the tube. It can be corked and reused even after a few months and can still lie in place -HYLOMAR H creates a seal six times better than the M series.
Hylomar H is supplied in the same original tubes as Hylomar M, but each tube is factory-marked with an “H” sticker due to lower demand for the H version.
High performance. Stable operating temperature range -50 ° C to 250 ° C (temporarily up to 300 ° C). Silicone has a short curing time of 2-15 minutes, which means that installation must be hurried, while HYLOMAR H has no restrictions. As it is in the form of a gel, it does not dry out and even sets after a few hours, so you can fold and adjust your joints at any time. It can also be used on vertical surfaces, as in this position it will not run off or fall off. The excess sealant pressed out between the sealing surfaces during assembly is hydraulically reduced, which significantly reduces the risk of blocking the oil channels. The old HYLOMAR H sealant can be easily removed by simply washing it off with a cloth soaked in acetone.
Product safety
Responsible person in the EU
Melkib Klus Raczek Spółka Komandytowa
ul. Stawowa 91
43-400 Cieszyn, Poland
Reviews
If you've added a review and it doesn't appear on the list, it may be pending moderation.
Leave feedback on the product
Log in with Google
