MFHX 13-18T static mixing nozzle, 2K adhesive mixer, 10:1 Mixpac F system, 235 mm

The MFHX 13-18T static mixing nozzle is a precise mixer for processing two-component hybrid adhesives and sealants in F systems with 4:1 and 10:1 mix ratios. Its 18 mixing elements and stepped outlet tip ensure even material dispensing, even in hard-to-reach areas.

The MFHX 13-18T static mixer is suitable for workshops, series production and service applications where repeatable bond quality and minimal material waste are essential.

Advantages and unique features

• 18 mixing elements provide intensive and homogeneous mixing of components A and B
• Supports 4:1 and 10:1 systems – one mixer for several types of 2K cartridges
• Stepped outlet tip allows trimming to the required bead width
• 13 mm outlet diameter for applying wider material beads
• 235 mm overall length for stable nozzle guidance and comfortable handling

Properties and applications

• Number of mixing elements – 18: effective mixing of adhesive or sealant without additional processing.
• 4:1 and 10:1 systems: suitable for most two-component cartridges in F standard.
• Stepped outlet tip: enables individual adjustment of the outlet diameter to the joint width or cavity being filled.
• 13 mm outlet diameter: designed for applying thick beads, fillings and bonding larger surfaces.
• 235 mm overall length: facilitates dispensing in deeper holes, profiles and hard-to-access areas.

Technical data

Storage recommendations

Store MFHX 13-18T mixing nozzles in a dry, clean and shaded place, in the original packaging. Avoid exposure to high temperatures, UV radiation and mechanical damage that could deform the mixing elements or the outlet tip.

FAQ

1) Which adhesives is the MFHX 13-18T mixing nozzle suitable for?
The nozzle is designed for two-component adhesives and sealants in F cartridges with 4:1 and 10:1 mix ratios, including hybrid adhesives used in industrial and service applications.

2) Can the outlet tip be trimmed to a smaller diameter?
Yes, the stepped outlet tip allows gradual trimming and adjustment of the outlet diameter to the required joint width.

3) Is the nozzle reusable?
In typical industrial applications, MFHX 13-18T nozzles are treated as single-use items – once the material has cured inside the mixer, it is recommended to replace it with a new one.

4) Does the nozzle fit all 2K cartridges?
No, the nozzle fits cartridges and dispensing systems in F standard with 4:1 and 10:1 mix ratios. Before purchase, it is advisable to check that the cartridge system matches the MFHX 13-18T designation.