Scribing Paint (LAYOUT FLUID) LACKFABRIK BÄDER – 237 ml Can with Brush, Blue Transparent

What it is and what it’s used for

Scribing Paint (LAYOUT FLUID) is a ready-to-use, liquid contrast coating for processing workpieces. It is applied to metal surfaces to create a clearly visible base for layout lines and markings prior to mechanical machining.

Why a 237 ml can with brush?

This version is designed for workstation and batch use. The brush integrated in the lid helps spread a thin, uniform layer over larger areas, which is practical for bigger parts and repeated marking tasks.

Typical applications

• applying layout markings on metal parts in preparation for machining

• marking finished parts and packages using stencils

• accurate marking and application of cutting contours

Key benefits (as described by the manufacturer)

• fast drying on all metals

• forms an even coat in thickness and colour tone

• no flaking or embrittlement

• non-reflective finish

• exact marking and exact cutting contour

• especially suitable for forged and cast parts

Limitations and safety notes

• Classified under GB CLP as: Flam. Liq. 2 (H225), Eye Irrit. 2 (H319), STOT SE 3 (H336). Signal word: Danger.

• Keep away from heat, sparks and open flames. Use only in a well-ventilated area and avoid breathing vapours/spray.

Helpful process add-ons

• metal cleaner/degreaser for surface preparation

• workshop wipes for wiping excess and cleaning after marking

• protective gloves and tightly sealed safety glasses (PPE guidance in SDS)

Technical parameters

Storage

Keep container tightly closed. Store in a cool, well-ventilated place. Keep away from ignition sources (no smoking) and protect from direct sunlight. Always close containers tightly after removal of product.

FAQ

When is the 237 ml can a better choice than the 35 ml pen?

When you need to cover larger areas, work in batches, or prefer brush application for a thin, uniform film.

Is it suitable for forged and cast parts?

Yes — the manufacturer specifically notes suitability for forged and cast parts.

Does it reflect light during marking?

The manufacturer describes the coating as non-reflective, supporting clearer layout work.