Scribing Paint (LAYOUT FLUID) LACKFABRIK BÄDER – 237 ml Can with Brush, Red Transparent

What it is and what it’s used for

Scribing Paint (LAYOUT FLUID) is a ready-to-use contrast coating for marking and layout work on metal parts before machining. Applied as a thin film, it creates a clearly visible background for scribing, layout lines and process markings, improving readability during subsequent operations.

Why a 237 ml can with brush?

This format is designed for workstation use and larger marking tasks. The integrated brush makes it easy to spread an even, thin layer over wider areas—ideal for batches, bigger parts or repeated layout work without switching tools.

Typical applications

• layout marking on metal prior to milling, drilling and cutting

• marking cutting contours and outlines

• identification and process markings (also with stencils)

• especially suitable for cast and forged parts (as indicated by the manufacturer)

What problems it helps solve

1) Poor visibility on bare metal – the contrast film makes lines easier to see.

2) Glare during layout – the manufacturer highlights a non-reflective finish for clearer inspection.

3) Chipping/flaking coatings – designed to form a stable film without flaking.

4) Inconsistent contour marking – an even coat supports clean, repeatable outlines.

How to apply for best results

1) Degrease the metal surface (especially after oils/coolants) for a more uniform film.

2) Use the brush to apply a thin, even layer.

3) Allow a short drying time (fast drying on metals per manufacturer).

4) Scribe/mark and proceed with machining along the defined contour.

Limitations and safety notes

• Classified as a flammable liquid. Keep away from heat, sparks and open flames; ensure good ventilation.

• May cause eye irritation and drowsiness/dizziness from vapours; use eye protection and gloves, avoid inhalation.

• Detailed handling and PPE guidance is provided in the SDS.

Helpful process add-ons

• metal cleaner/degreaser for surface preparation

• workshop wipes for wiping excess and cleaning after marking

• protective gloves and safety goggles (according to SDS)

Technical parameters

Storage

Store tightly closed in a cool, well-ventilated place. Keep away from ignition sources (no smoking) and protect from direct sunlight. Close the container carefully after each use.

FAQ

When is the 237 ml can a better choice than the 35 ml pen?

When you mark larger areas, work in batches or need a brush-applied, even film across wider surfaces.

Is it suitable for marking on metal?

Yes — it’s intended for layout and marking on metal parts prior to machining.

Is the product flammable?

Yes — it is classified as a flammable liquid and must be handled accordingly.